commit e890f13e596ef311c219d8ffe8d7107e56971ee4 Author: Jiri Slaby Date: Thu Mar 3 13:28:30 2016 +0100 Linux 3.12.56 commit 7b1db06ff530bd1fa18e492ba61c5f7dc4e181a4 Author: Hannes Reinecke Date: Fri Feb 12 09:39:15 2016 +0100 bio: return EINTR if copying to user space got interrupted commit 2d99b55d378c996b9692a0c93dd25f4ed5d58934 upstream. Commit 35dc248383bbab0a7203fca4d722875bc81ef091 introduced a check for current->mm to see if we have a user space context and only copies data if we do. Now if an IO gets interrupted by a signal data isn't copied into user space any more (as we don't have a user space context) but user space isn't notified about it. This patch modifies the behaviour to return -EINTR from bio_uncopy_user() to notify userland that a signal has interrupted the syscall, otherwise it could lead to a situation where the caller may get a buffer with no data returned. This can be reproduced by issuing SG_IO ioctl()s in one thread while constantly sending signals to it. [js] backport to 3.12 Fixes: 35dc248 [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal Signed-off-by: Johannes Thumshirn Signed-off-by: Hannes Reinecke Signed-off-by: Jens Axboe Signed-off-by: Jiri Slaby commit 1e719417f896f35e25e27e974a4f1bbffb87b4c1 Author: Borislav Petkov Date: Tue Dec 1 15:52:36 2015 +0100 EDAC, mc_sysfs: Fix freeing bus' name commit 12e26969b32c79018165d52caff3762135614aa1 upstream. I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[] [] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP Signed-off-by: Borislav Petkov Cc: Mauro Carvalho Chehab Fixes: 7a623c039075 ("edac: rewrite the sysfs code to use struct device") Signed-off-by: Jiri Slaby commit 2da2c15ffb7ed572f0d504cb1bd97fd66f3d9186 Author: Jeff Layton Date: Thu Jan 7 16:38:10 2016 -0500 locks: fix unlock when fcntl_setlk races with a close commit 7f3697e24dc3820b10f445a4a7d914fc356012d1 upstream. Dmitry reported that he was able to reproduce the WARN_ON_ONCE that fires in locks_free_lock_context when the flc_posix list isn't empty. The problem turns out to be that we're basically rebuilding the file_lock from scratch in fcntl_setlk when we discover that the setlk has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END, then we may end up with fl_start and fl_end values that differ from when the lock was initially set, if the file position or length of the file has changed in the interim. Fix this by just reusing the same lock request structure, and simply override fl_type value with F_UNLCK as appropriate. That ensures that we really are unlocking the lock that was initially set. While we're there, make sure that we do pop a WARN_ON_ONCE if the removal ever fails. Also return -EBADF in this event, since that's what we would have returned if the close had happened earlier. Cc: Alexander Viro Fixes: c293621bbf67 (stale POSIX lock handling) Reported-by: Dmitry Vyukov Signed-off-by: Jeff Layton Acked-by: "J. Bruce Fields" Signed-off-by: Jiri Slaby commit 7949b7bfff8be7cf0fc02d06b80f4e9d1c1189ae Author: Konrad Rzeszutek Wilk Date: Thu Feb 11 16:10:26 2016 -0500 xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted. commit 4d8c8bd6f2062c9988817183a91fe2e623c8aa5e upstream. Occasionaly PV guests would crash with: pciback 0000:00:00.1: Xen PCI mapped GSI0 to IRQ16 BUG: unable to handle kernel paging request at 0000000d1a8c0be0 .. snip.. ] find_next_bit+0xb/0x10 [] cpumask_next_and+0x22/0x40 [] pci_device_probe+0xb8/0x120 [] ? driver_sysfs_add+0x77/0xa0 [] driver_probe_device+0x1a4/0x2d0 [] ? pci_match_device+0xdd/0x110 [] __device_attach_driver+0xa7/0xb0 [] ? __driver_attach+0xa0/0xa0 [] bus_for_each_drv+0x62/0x90 [] __device_attach+0xbd/0x110 [] device_attach+0xb/0x10 [] pci_bus_add_device+0x3c/0x70 [] pci_bus_add_devices+0x38/0x80 [] pcifront_scan_root+0x13e/0x1a0 [] pcifront_backend_changed+0x262/0x60b [] ? xenbus_gather+0xd6/0x160 [] ? put_object+0x2f/0x50 [] xenbus_otherend_changed+0x9d/0xa0 [] backend_changed+0xe/0x10 [] xenwatch_thread+0xc8/0x190 [] ? woken_wake_function+0x10/0x10 which was the result of two things: When we call pci_scan_root_bus we would pass in 'sd' (sysdata) pointer which was an 'pcifront_sd' structure. However in the pci_device_add it expects that the 'sd' is 'struct sysdata' and sets the dev->node to what is in sd->node (offset 4): set_dev_node(&dev->dev, pcibus_to_node(bus)); __pcibus_to_node(const struct pci_bus *bus) { const struct pci_sysdata *sd = bus->sysdata; return sd->node; } However our structure was pcifront_sd which had nothing at that offset: struct pcifront_sd { int domain; /* 0 4 */ /* XXX 4 bytes hole, try to pack */ struct pcifront_device * pdev; /* 8 8 */ } That is an hole - filled with garbage as we used kmalloc instead of kzalloc (the second problem). This patch fixes the issue by: 1) Use kzalloc to initialize to a well known state. 2) Put 'struct pci_sysdata' at the start of 'pcifront_sd'. That way access to the 'node' will access the right offset. Signed-off-by: Konrad Rzeszutek Wilk Reviewed-by: Boris Ostrovsky Signed-off-by: David Vrabel Signed-off-by: Jiri Slaby commit 66efd9e7538d2f5823e7d2ccae2b16e8e57b7d15 Author: Al Viro Date: Sat Feb 27 19:17:33 2016 -0500 do_last(): don't let a bogus return value from ->open() et.al. to confuse us commit c80567c82ae4814a41287618e315a60ecf513be6 upstream. ... into returning a positive to path_openat(), which would interpret that as "symlink had been encountered" and proceed to corrupt memory, etc. It can only happen due to a bug in some ->open() instance or in some LSM hook, etc., so we report any such event *and* make sure it doesn't trick us into further unpleasantness. Signed-off-by: Al Viro Signed-off-by: Jiri Slaby commit 2976c211bd096c472f996a368030eb1c18cb174c Author: Simon Guinot Date: Thu Sep 10 00:15:18 2015 +0200 kernel/resource.c: fix muxed resource handling in __request_region() commit 59ceeaaf355fa0fb16558ef7c24413c804932ada upstream. In __request_region, if a conflict with a BUSY and MUXED resource is detected, then the caller goes to sleep and waits for the resource to be released. A pointer on the conflicting resource is kept. At wake-up this pointer is used as a parent to retry to request the region. A first problem is that this pointer might well be invalid (if for example the conflicting resource have already been freed). Another problem is that the next call to __request_region() fails to detect a remaining conflict. The previously conflicting resource is passed as a parameter and __request_region() will look for a conflict among the children of this resource and not at the resource itself. It is likely to succeed anyway, even if there is still a conflict. Instead, the parent of the conflicting resource should be passed to __request_region(). As a fix, this patch doesn't update the parent resource pointer in the case we have to wait for a muxed region right after. Reported-and-tested-by: Vincent Pelletier Signed-off-by: Simon Guinot Tested-by: Vincent Donnefort Signed-off-by: Linus Torvalds Signed-off-by: Jiri Slaby commit 6e234db52528f10632aa37c17e7bc164192c16f1 Author: Stefan Hajnoczi Date: Thu Feb 18 18:55:54 2016 +0000 sunrpc/cache: fix off-by-one in qword_get() commit b7052cd7bcf3c1478796e93e3dff2b44c9e82943 upstream. The qword_get() function NUL-terminates its output buffer. If the input string is in hex format \xXXXX... and the same length as the output buffer, there is an off-by-one: int qword_get(char **bpp, char *dest, int bufsize) { ... while (len < bufsize) { ... *dest++ = (h << 4) | l; len++; } ... *dest = '\0'; return len; } This patch ensures the NUL terminator doesn't fall outside the output buffer. Signed-off-by: Stefan Hajnoczi Signed-off-by: J. Bruce Fields Signed-off-by: Jiri Slaby commit b16ad9e9cf5fe5f4eac472d60db935fce212a78e Author: Steven Rostedt (Red Hat) Date: Wed Feb 24 09:04:24 2016 -0500 tracing: Fix showing function event in available_events commit d045437a169f899dfb0f6f7ede24cc042543ced9 upstream. The ftrace:function event is only displayed for parsing the function tracer data. It is not used to enable function tracing, and does not include an "enable" file in its event directory. Originally, this event was kept separate from other events because it did not have a ->reg parameter. But perf added a "reg" parameter for its use which caused issues, because it made the event available to functions where it was not compatible for. Commit 9b63776fa3ca9 "tracing: Do not enable function event with enable" added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event from being enabled by normal trace events. But this commit missed keeping the function event from being displayed by the "available_events" directory, which is used to show what events can be enabled by set_event. One documented way to enable all events is to: cat available_events > set_event But because the function event is displayed in the available_events, this now causes an INVALID error: cat: write error: Invalid argument Reported-by: Chunyu Hu Fixes: 9b63776fa3ca9 "tracing: Do not enable function event with enable" Signed-off-by: Steven Rostedt Signed-off-by: Jiri Slaby commit 56ba745dfc83ec1d94e4caec9b5315dc5e63f8ad Author: Christian Borntraeger Date: Fri Feb 19 13:11:46 2016 +0100 KVM: async_pf: do not warn on page allocation failures commit d7444794a02ff655eda87e3cc54e86b940e7736f upstream. In async_pf we try to allocate with NOWAIT to get an element quickly or fail. This code also handle failures gracefully. Lets silence potential page allocation failures under load. qemu-system-s39: page allocation failure: order:0,mode:0x2200000 [...] Call Trace: ([<00000000001146b8>] show_trace+0xf8/0x148) [<000000000011476a>] show_stack+0x62/0xe8 [<00000000004a36b8>] dump_stack+0x70/0x98 [<0000000000272c3a>] warn_alloc_failed+0xd2/0x148 [<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38 [<00000000002cd36a>] new_slab+0x382/0x400 [<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378 [<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0 [<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198 [<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58 [<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690 [<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510 [<00000000002f68ec>] SyS_ioctl+0xa4/0xb8 [<0000000000781c5e>] system_call+0xd6/0x264 [<000003ffa24fa06a>] 0x3ffa24fa06a Signed-off-by: Christian Borntraeger Reviewed-by: Dominik Dingel Signed-off-by: Paolo Bonzini Signed-off-by: Jiri Slaby commit 3fa6f32aae8767a072a5bd97653f704455fc3e2b Author: Benjamin Coddington Date: Wed Feb 17 10:41:41 2016 -0500 NFSv4: Fix a dentry leak on alias use commit d9dfd8d741683347ee159d25f5b50c346a0df557 upstream. In the case where d_add_unique() finds an appropriate alias to use it will have already incremented the reference count. An additional dget() to swap the open context's dentry is unnecessary and will leak a reference. Signed-off-by: Benjamin Coddington Fixes: 275bb307865a3 ("NFSv4: Move dentry instantiation into the NFSv4-...") Signed-off-by: Trond Myklebust Signed-off-by: Jiri Slaby commit febaddd7d970970cdd261176fd84d1d605045738 Author: Christoph Hellwig Date: Mon Feb 8 21:11:50 2016 +0100 nfs: fix nfs_size_to_loff_t commit 50ab8ec74a153eb30db26529088bc57dd700b24c upstream. See http: //www.infradead.org/rpr.html X-Evolution-Source: 1451162204.2173.11@leira.trondhjem.org Content-Transfer-Encoding: 8bit Mime-Version: 1.0 We support OFFSET_MAX just fine, so don't round down below it. Also switch to using min_t to make the helper more readable. Signed-off-by: Christoph Hellwig Fixes: 433c92379d9c ("NFS: Clean up nfs_size_to_loff_t()") Signed-off-by: Trond Myklebust Signed-off-by: Jiri Slaby commit b98e34c37756d8601fd29ecbed68beb9c0ee2f4e Author: Sebastian Andrzej Siewior Date: Mon Jan 25 10:08:00 2016 -0600 PCI/AER: Flush workqueue on device remove to avoid use-after-free commit 4ae2182b1e3407de369f8c5d799543b7db74221b upstream. A Root Port's AER structure (rpc) contains a queue of events. aer_irq() enqueues AER status information and schedules aer_isr() to dequeue and process it. When we remove a device, aer_remove() waits for the queue to be empty, then frees the rpc struct. But aer_isr() references the rpc struct after dequeueing and possibly emptying the queue, which can cause a use-after-free error as in the following scenario with two threads, aer_isr() on the left and a concurrent aer_remove() on the right: Thread A Thread B -------- -------- aer_irq(): rpc->prod_idx++ aer_remove(): wait_event(rpc->prod_idx == rpc->cons_idx) # now blocked until queue becomes empty aer_isr(): # ... rpc->cons_idx++ # unblocked because queue is now empty ... kfree(rpc) mutex_unlock(&rpc->rpc_mutex) To prevent this problem, use flush_work() to wait until the last scheduled instance of aer_isr() has completed before freeing the rpc struct in aer_remove(). I reproduced this use-after-free by flashing a device FPGA and re-enumerating the bus to find the new device. With SLUB debug, this crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in GPR25: pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000 Unable to handle kernel paging request for data at address 0x27ef9e3e Workqueue: events aer_isr GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0 NIP [602f5328] pci_walk_bus+0xd4/0x104 [bhelgaas: changelog, stable tag] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Bjorn Helgaas Signed-off-by: Jiri Slaby commit 753a93a13c01eeda7e549bdc449c6a9f7f8a3ac1 Author: Tejun Heo Date: Mon Feb 1 11:33:21 2016 -0500 libata: fix sff host state machine locking while polling commit 8eee1d3ed5b6fc8e14389567c9a6f53f82bb7224 upstream. The bulk of ATA host state machine is implemented by ata_sff_hsm_move(). The function is called from either the interrupt handler or, if polling, a work item. Unlike from the interrupt path, the polling path calls the function without holding the host lock and ata_sff_hsm_move() selectively grabs the lock. This is completely broken. If an IRQ triggers while polling is in progress, the two can easily race and end up accessing the hardware and updating state machine state at the same time. This can put the state machine in an illegal state and lead to a crash like the following. kernel BUG at drivers/ata/libata-sff.c:1302! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 1 PID: 10679 Comm: syz-executor Not tainted 4.5.0-rc1+ #300 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88002bd00000 ti: ffff88002e048000 task.ti: ffff88002e048000 RIP: 0010:[] [] ata_sff_hsm_move+0x619/0x1c60 ... Call Trace: [] __ata_sff_port_intr+0x1e1/0x3a0 drivers/ata/libata-sff.c:1584 [] ata_bmdma_port_intr+0x71/0x400 drivers/ata/libata-sff.c:2877 [< inline >] __ata_sff_interrupt drivers/ata/libata-sff.c:1629 [] ata_bmdma_interrupt+0x253/0x580 drivers/ata/libata-sff.c:2902 [] handle_irq_event_percpu+0x108/0x7e0 kernel/irq/handle.c:157 [] handle_irq_event+0xa7/0x140 kernel/irq/handle.c:205 [] handle_edge_irq+0x1e3/0x8d0 kernel/irq/chip.c:623 [< inline >] generic_handle_irq_desc include/linux/irqdesc.h:146 [] handle_irq+0x10c/0x2a0 arch/x86/kernel/irq_64.c:78 [] do_IRQ+0x7d/0x1a0 arch/x86/kernel/irq.c:240 [] common_interrupt+0x8c/0x8c arch/x86/entry/entry_64.S:520 [< inline >] rcu_lock_acquire include/linux/rcupdate.h:490 [< inline >] rcu_read_lock include/linux/rcupdate.h:874 [] filemap_map_pages+0x131/0xba0 mm/filemap.c:2145 [< inline >] do_fault_around mm/memory.c:2943 [< inline >] do_read_fault mm/memory.c:2962 [< inline >] do_fault mm/memory.c:3133 [< inline >] handle_pte_fault mm/memory.c:3308 [< inline >] __handle_mm_fault mm/memory.c:3418 [] handle_mm_fault+0x2516/0x49a0 mm/memory.c:3447 [] __do_page_fault+0x376/0x960 arch/x86/mm/fault.c:1238 [] trace_do_page_fault+0xe8/0x420 arch/x86/mm/fault.c:1331 [] do_async_page_fault+0x14/0xd0 arch/x86/kernel/kvm.c:264 [] async_page_fault+0x28/0x30 arch/x86/entry/entry_64.S:986 Fix it by ensuring that the polling path is holding the host lock before entering ata_sff_hsm_move() so that all hardware accesses and state updates are performed under the host lock. Signed-off-by: Tejun Heo Reported-and-tested-by: Dmitry Vyukov Link: http://lkml.kernel.org/g/CACT4Y+b_JsOxJu2EZyEf+mOXORc_zid5V1-pLZSroJVxyWdSpw@mail.gmail.com Signed-off-by: Jiri Slaby commit ce5ed0e63db6961eb7cf6118dce131ce2c57f456 Author: Johannes Berg Date: Tue Jan 26 11:29:03 2016 +0100 rfkill: fix rfkill_fop_read wait_event usage commit 6736fde9672ff6717ac576e9bba2fd5f3dfec822 upstream. The code within wait_event_interruptible() is called with !TASK_RUNNING, so mustn't call any functions that can sleep, like mutex_lock(). Since we re-check the list_empty() in a loop after the wait, it's safe to simply use list_empty() without locking. This bug has existed forever, but was only discovered now because all userspace implementations, including the default 'rfkill' tool, use poll() or select() to get a readable fd before attempting to read. Fixes: c64fb01627e24 ("rfkill: create useful userspace interface") Reported-by: Dmitry Vyukov Signed-off-by: Johannes Berg Signed-off-by: Jiri Slaby commit 42dad46c1a28592829c24b4a10525e39a2323e19 Author: Oliver Neukum Date: Mon Jan 18 15:45:18 2016 +0100 cdc-acm:exclude Samsung phone 04e8:685d commit e912e685f372ab62a2405a1acd923597f524e94a upstream. This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by: Oliver Neukum Signed-off-by: Jiri Slaby commit 715a01aa261cd312c2aaa8614eadd6b28fd3a018 Author: Ilya Dryomov Date: Wed Feb 17 20:04:08 2016 +0100 libceph: don't bail early from try_read() when skipping a message commit e7a88e82fe380459b864e05b372638aeacb0f52d upstream. The contract between try_read() and try_write() is that when called each processes as much data as possible. When instructed by osd_client to skip a message, try_read() is violating this contract by returning after receiving and discarding a single message instead of checking for more. try_write() then gets a chance to write out more requests, generating more replies/skips for try_read() to handle, forcing the messenger into a starvation loop. Reported-by: Varada Kari Signed-off-by: Ilya Dryomov Tested-by: Varada Kari Reviewed-by: Alex Elder Signed-off-by: Jiri Slaby commit c40612ad30e2381d46627e888fd7d945c1cb5b7e Author: Peter Rosin Date: Thu Feb 18 14:07:52 2016 +0100 hwmon: (ads1015) Handle negative conversion values correctly commit acc146943957d7418a6846f06e029b2c5e87e0d5 upstream. Make the divisor signed as DIV_ROUND_CLOSEST is undefined for negative dividends when the divisor is unsigned. Signed-off-by: Peter Rosin Signed-off-by: Guenter Roeck Signed-off-by: Jiri Slaby commit 150df7a072bf5e3915201e0f617fecc337183096 Author: Mike Marciniszyn Date: Thu Jan 7 16:44:10 2016 -0500 IB/qib: fix mcast detach when qp not attached commit 09dc9cd6528f5b52bcbd3292a6312e762c85260f upstream. The code produces the following trace: [1750924.419007] general protection fault: 0000 [#3] SMP [1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4 dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core [1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D 3.13.0-39-generic #66-Ubuntu [1750924.420364] Hardware name: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007 [1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti: ffff88007af1c000 [1750924.420364] RIP: 0010:[] [] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.420364] RSP: 0018:ffff88007af1dd70 EFLAGS: 00010246 [1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX: 000000000000000f [1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI: 6764697200000000 [1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09: 0000000000000000 [1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12: ffff88007baa1d98 [1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15: 0000000000000000 [1750924.420364] FS: 00007ffff7fd8740(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [1750924.420364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4: 00000000000007e0 [1750924.420364] Stack: [1750924.420364] ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429 000000007af1de20 [1750924.420364] ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70 ffffffffa00cb313 [1750924.420364] 00007fffffffde88 0000000000000000 0000000000000008 ffff88003ecab000 [1750924.420364] Call Trace: [1750924.420364] [] qib_multicast_detach+0x1e9/0x350 [ib_qib] [1750924.568035] [] ? ib_uverbs_modify_qp+0x323/0x3d0 [ib_uverbs] [1750924.568035] [] ib_detach_mcast+0x31/0x50 [ib_core] [1750924.568035] [] ib_uverbs_detach_mcast+0x93/0x170 [ib_uverbs] [1750924.568035] [] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs] [1750924.568035] [] ? apparmor_file_permission+0x18/0x20 [1750924.568035] [] ? security_file_permission+0x23/0xa0 [1750924.568035] [] vfs_write+0xb4/0x1f0 [1750924.568035] [] SyS_write+0x49/0xa0 [1750924.568035] [] system_call_fastpath+0x1a/0x1f [1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10 ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f [1750924.568035] RIP [] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.568035] RSP [1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ] The fix is to note the qib_mcast_qp that was found. If none is found, then return EINVAL indicating the error. Reviewed-by: Dennis Dalessandro Reported-by: Jason Gunthorpe Signed-off-by: Mike Marciniszyn Signed-off-by: Doug Ledford Signed-off-by: Jiri Slaby commit 759ff5dccf67b3617eecd9dd85ec74f2dac37d09 Author: Alex Deucher Date: Fri Feb 19 18:05:10 2016 -0500 drm/radeon/pm: adjust display configuration after powerstate commit 39d4275058baf53e89203407bf3841ff2c74fa32 upstream. set_power_state defaults to no displays, so we need to update the display configuration after setting up the powerstate on the first call. In most cases this is not an issue since ends up getting called multiple times at any given modeset and the proper order is achieved in the display changed handling at the top of the function. Reviewed-by: Christian König Acked-by: Jordan Lazare Signed-off-by: Alex Deucher Signed-off-by: Jiri Slaby commit 84a0ab7203b29d5d37671692c25b8d1458da4d71 Author: Rasmus Villemoes Date: Mon Feb 15 19:41:47 2016 +0100 drm/radeon: use post-decrement in error handling commit bc3f5d8c4ca01555820617eb3b6c0857e4df710d upstream. We need to use post-decrement to get the pci_map_page undone also for i==0, and to avoid some very unpleasant behaviour if pci_map_page failed already at i==0. Reviewed-by: Christian König Signed-off-by: Rasmus Villemoes Signed-off-by: Alex Deucher Signed-off-by: Jiri Slaby commit 71b8d0d34b7881dfaf4ca80fc710e149af8842d1 Author: Gerd Hoffmann Date: Tue Feb 16 14:25:00 2016 +0100 drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command commit 34855706c30d52b0a744da44348b5d1cc39fbe51 upstream. This avoids integer overflows on 32bit machines when calculating reloc_info size, as reported by Alan Cox. Cc: gnomes@lxorguk.ukuu.org.uk Signed-off-by: Gerd Hoffmann Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie Signed-off-by: Jiri Slaby commit 554b014005ab84bb9f1ac8edc4492c6ae5e176f7 Author: Jani Nikula Date: Wed Jan 13 16:35:20 2016 +0200 drm/i915/dp: fall back to 18 bpp when sink capability is unknown commit 5efd407674068dede403551bea3b0b134c32513a upstream. Per DP spec, the source device should fall back to 18 bpp, VESA range RGB when the sink capability is unknown. Fix the color depth clamping. 18 bpp color depth should ensure full color range in automatic mode. The clamping has been HDMI specific since its introduction in commit 996a2239f93b03c5972923f04b097f65565c5bed Author: Daniel Vetter Date: Fri Apr 19 11:24:34 2013 +0200 drm/i915: Disable high-bpc on pre-1.4 EDID screens Reported-and-tested-by: Dihan Wickremasuriya Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331 Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1452695720-7076-1-git-send-email-jani.nikula@intel.com (cherry picked from commit 013dd9e038723bbd2aa67be51847384b75be8253) Signed-off-by: Jiri Slaby commit 40df18b49e7fe4ec9ab93f68c33661ee291149bd Author: Nicolai Hähnle Date: Fri Feb 5 14:35:53 2016 -0500 drm/radeon: hold reference to fences in radeon_sa_bo_new commit f6ff4f67cdf8455d0a4226eeeaf5af17c37d05eb upstream. An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by: Nicolai Hähnle Reviewed-by: Christian König Signed-off-by: Jiri Slaby commit e2f0c800e65090d8532040c4307a32fdf0c87343 Author: Alex Deucher Date: Thu Dec 17 12:52:17 2015 -0500 drm/radeon: clean up fujitsu quirks commit 0eb1c3d4084eeb6fb3a703f88d6ce1521f8fcdd1 upstream. Combine the two quirks. bug: https://bugzilla.kernel.org/show_bug.cgi?id=109481 Signed-off-by: Alex Deucher Signed-off-by: Jiri Slaby commit 2369804a6758b44651fb2aa0bded155f0035aff7 Author: Rob Clark Date: Wed Oct 15 15:00:47 2014 -0400 drm/vmwgfx: respect 'nomodeset' commit 96c5d076f0a5e2023ecdb44d8261f87641ee71e0 upstream. Signed-off-by: Rob Clark Reviewed-by: Thomas Hellstrom . Signed-off-by: Dave Airlie Signed-off-by: Jiri Slaby commit a6827009cb013e8cffb430e960f656d6c6b9d60e Author: Dmitry V. Levin Date: Sun Dec 27 02:13:27 2015 +0300 sparc64: fix incorrect sign extension in sys_sparc64_personality commit 525fd5a94e1be0776fa652df5c687697db508c91 upstream. The value returned by sys_personality has type "long int". It is saved to a variable of type "int", which is not a problem yet because the type of task_struct->pesonality is "unsigned int". The problem is the sign extension from "int" to "long int" that happens on return from sys_sparc64_personality. For example, a userspace call personality((unsigned) -EINVAL) will result to any subsequent personality call, including absolutely harmless read-only personality(0xffffffff) call, failing with errno set to EINVAL. Signed-off-by: Dmitry V. Levin Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit afe13fe42a288adbd6e3a0eff1933a1ae4774440 Author: Borislav Petkov Date: Fri Nov 27 10:38:38 2015 +0100 EDAC: Robustify workqueues destruction commit fcd5c4dd8201595d4c598c9cca5e54760277d687 upstream. EDAC workqueue destruction is really fragile. We cancel delayed work but if it is still running and requeues itself, we still go ahead and destroy the workqueue and the queued work explodes when workqueue core attempts to run it. Make the destruction more robust by switching op_state to offline so that requeuing stops. Cancel any pending work *synchronously* too. EDAC i7core: Driver loaded. general protection fault: 0000 [#1] SMP CPU 12 Modules linked in: Supported: Yes Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7 RIP: 0010:[] [] __queue_work+0x17/0x3f0 < ... regs ...> Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600) Stack: ... Call Trace: call_timer_fn run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt intel_idle cpuidle_idle_call cpu_idle Code: ... RIP __queue_work RSP <...> Signed-off-by: Borislav Petkov Signed-off-by: Jiri Slaby commit 9ab73ebfeafc5451c343263118aaf84ad8f256cf Author: Linus Walleij Date: Mon Jan 4 02:21:55 2016 +0100 mmc: mmci: fix an ages old detection error commit 0bcb7efdff63564e80fe84dd36a9fbdfbf6697a4 upstream. commit 4956e10903fd ("ARM: 6244/1: mmci: add variant data and default MCICLOCK support") added variant data for ARM, U300 and Ux500 variants. The Nomadik NHK8815/8820 variant was erroneously labeled as a U300 variant, and when the proper Nomadik variant was later introduced in commit 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik MMCI variant") this was not fixes. Let's say this fixes the latter commit as there was no proper Nomadik support until then. Fixes: 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik...") Signed-off-by: Linus Walleij Signed-off-by: Ulf Hansson Signed-off-by: Jiri Slaby commit f26c5a2c6c3f003c95edcaf090ceeab35ab1e246 Author: Adrian Hunter Date: Thu Nov 26 14:00:50 2015 +0200 mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off() commit 5c671c410c8704800f4f1673b6f572137e7e6ddd upstream. sdhci has a legacy facility to prevent runtime suspend if the bus power is on. This is needed in cases where the power to the card is dependent on the bus power. It is controlled by a pair of functions: sdhci_runtime_pm_bus_on() and sdhci_runtime_pm_bus_off(). These functions use a boolean variable 'bus_on' to ensure changes are always paired. There is an additional check for 'runtime_suspended' which is the problem. In fact, its use is ill-conceived as the only requirement for the logic is that 'on' and 'off' are paired, which is actually broken by the check, for example if the bus power is turned on during runtime resume. So remove the check. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Jiri Slaby commit bb83e03e5dcaf3352bec1e91ea25a11ed3a2bcea Author: Richard Cochran Date: Tue Dec 22 22:19:58 2015 +0100 posix-clock: Fix return code on the poll method's error path commit 1b9f23727abb92c5e58f139e7d180befcaa06fe0 upstream. The posix_clock_poll function is supposed to return a bit mask of POLLxxx values. However, in case the hardware has disappeared (due to hot plugging for example) this code returns -ENODEV in a futile attempt to throw an error at the file descriptor level. The kernel's file_operations interface does not accept such error codes from the poll method. Instead, this function aught to return POLLERR. The value -ENODEV does, in fact, contain the POLLERR bit (and almost all the other POLLxxx bits as well), but only by chance. This patch fixes code to return a proper bit mask. Credit goes to Markus Elfring for pointing out the suspicious signed/unsigned mismatch. Reported-by: Markus Elfring igned-off-by: Richard Cochran Cc: John Stultz Cc: Julia Lawall Link: http://lkml.kernel.org/r/1450819198-17420-1-git-send-email-richardcochran@gmail.com Signed-off-by: Thomas Gleixner Signed-off-by: Jiri Slaby commit da7dbf91fceb737d8437055cd4ba4da57f971623 Author: Mikulas Patocka Date: Fri Jan 8 19:07:55 2016 -0500 dm snapshot: fix hung bios when copy error occurs commit 385277bfb57faac44e92497104ba542cdd82d5fe upstream. When there is an error copying a chunk dm-snapshot can incorrectly hold associated bios indefinitely, resulting in hung IO. The function copy_callback sets pe->error if there was error copying the chunk, and then calls complete_exception. complete_exception calls pending_complete on error, otherwise it calls commit_exception with commit_callback (and commit_callback calls complete_exception). The persistent exception store (dm-snap-persistent.c) assumes that calls to prepare_exception and commit_exception are paired. persistent_prepare_exception increases ps->pending_count and persistent_commit_exception decreases it. If there is a copy error, persistent_prepare_exception is called but persistent_commit_exception is not. This results in the variable ps->pending_count never returning to zero and that causes some pending exceptions (and their associated bios) to be held forever. Fix this by unconditionally calling commit_exception regardless of whether the copy was successful. A new "valid" parameter is added to commit_exception -- when the copy fails this parameter is set to zero so that the chunk that failed to copy (and all following chunks) is not recorded in the snapshot store. Also, remove commit_callback now that it is merely a wrapper around pending_complete. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Jiri Slaby commit 9f1f8ac7059105958dc5c870940477b647637c29 Author: Mike Snitzer Date: Mon Dec 14 09:26:01 2015 -0500 dm space map metadata: remove unused variable in brb_pop() commit 512167788a6fe9481a33a3cce5f80b684631a1bb upstream. Remove the unused struct block_op pointer that was inadvertantly introduced, via cut-and-paste of previous brb_op() code, as part of commit 50dd842ad. (Cc'ing stable@ because commit 50dd842ad did) Fixes: 50dd842ad ("dm space map metadata: fix ref counting bug when bootstrapping a new space map") Reported-by: David Binderman Signed-off-by: Mike Snitzer Signed-off-by: Jiri Slaby commit 3924f7f0661ea53d22f5b2c085e21cf3c307537a Author: Mauro Carvalho Chehab Date: Wed Feb 3 17:33:48 2016 -0200 tda1004x: only update the frontend properties if locked commit e8beb02343e7582980c6705816cd957cf4f74c7a upstream. The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby commit 15d2e31eca2d4700a0e21d52df081afd65834653 Author: Antonio Ospite Date: Fri Oct 2 17:33:13 2015 -0300 gspca: ov534/topro: prevent a division by 0 commit dcc7fdbec53a960588f2c40232db2c6466c09917 upstream. v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[] [] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [] ? v4l_s_parm+0x21/0x50 [videodev] [] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [] ? __video_do_ioctl+0x280/0x2f0 [videodev] [] ? video_ioctl2+0x20/0x20 [videodev] [] ? video_usercopy+0x319/0x4e0 [videodev] [] ? page_add_new_anon_rmap+0x71/0xa0 [] ? mem_cgroup_commit_charge+0x52/0x90 [] ? handle_mm_fault+0xc18/0x1680 [] ? v4l2_ioctl+0xac/0xd0 [videodev] [] ? do_vfs_ioctl+0x28f/0x480 [] ? SyS_ioctl+0x74/0x80 [] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by: Antonio Ospite Reviewed-by: Hans de Goede Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby commit f6220a7af83a2c7025a096ba0ef16601d7ee186d Author: Malcolm Priestley Date: Mon Aug 31 06:13:45 2015 -0300 media: dvb-core: Don't force CAN_INVERSION_AUTO in oneshot mode commit c9d57de6103e343f2d4e04ea8d9e417e10a24da7 upstream. When in FE_TUNE_MODE_ONESHOT the frontend must report the actual capabilities so user can take appropriate action. With frontends that can't do auto inversion this is done by dvb-core automatically so CAN_INVERSION_AUTO is valid. However, when in FE_TUNE_MODE_ONESHOT this is not true. So only set FE_CAN_INVERSION_AUTO in modes other than FE_TUNE_MODE_ONESHOT Signed-off-by: Malcolm Priestley Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jiri Slaby commit b818d63ccdbe8b849511892c8b4abd149b448d2d Author: Vegard Nossum Date: Wed Dec 16 21:59:56 2015 +0100 uml: fix hostfs mknod() commit 9f2dfda2f2f1c6181c3732c16b85c59ab2d195e0 upstream. An inverted return value check in hostfs_mknod() caused the function to return success after handling it as an error (and cleaning up). It resulted in the following segfault when trying to bind() a named unix socket: Pid: 198, comm: a.out Not tainted 4.4.0-rc4 RIP: 0033:[<0000000061077df6>] RSP: 00000000daae5d60 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006092a460 RCX: 00000000dfc54208 RDX: 0000000061073ef1 RSI: 0000000000000070 RDI: 00000000e027d600 RBP: 00000000daae5de0 R08: 00000000da980ac0 R09: 0000000000000000 R10: 0000000000000003 R11: 00007fb1ae08f72a R12: 0000000000000000 R13: 000000006092a460 R14: 00000000daaa97c0 R15: 00000000daaa9a88 Kernel panic - not syncing: Kernel mode fault at addr 0x40, ip 0x61077df6 CPU: 0 PID: 198 Comm: a.out Not tainted 4.4.0-rc4 #1 Stack: e027d620 dfc54208 0000006f da981398 61bee000 0000c1ed daae5de0 0000006e e027d620 dfcd4208 00000005 6092a460 Call Trace: [<60dedc67>] SyS_bind+0xf7/0x110 [<600587be>] handle_syscall+0x7e/0x80 [<60066ad7>] userspace+0x3e7/0x4e0 [<6006321f>] ? save_registers+0x1f/0x40 [<6006c88e>] ? arch_prctl+0x1be/0x1f0 [<60054985>] fork_handler+0x85/0x90 Let's also get rid of the "cosmic ray protection" while we're at it. Fixes: e9193059b1b3 "hostfs: fix races in dentry_name() and inode_name()" Signed-off-by: Vegard Nossum Cc: Jeff Dike Cc: Al Viro Signed-off-by: Richard Weinberger Signed-off-by: Jiri Slaby commit c8ed7e3ffb97fe30b10dad8d2279af599fd32cc5 Author: Vegard Nossum Date: Fri Dec 18 21:28:53 2015 +0100 uml: flush stdout before forking commit 0754fb298f2f2719f0393491d010d46cfb25d043 upstream. I was seeing some really weird behaviour where piping UML's output somewhere would cause output to get duplicated: $ ./vmlinux | head -n 40 Checking that ptrace can change system call numbers...Core dump limits : soft - 0 hard - NONE OK Checking syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Checking advanced syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Core dump limits : soft - 0 hard - NONE This is because these tests do a fork() which duplicates the non-empty stdout buffer, then glibc flushes the duplicated buffer as each child exits. A simple workaround is to flush before forking. Signed-off-by: Vegard Nossum Signed-off-by: Richard Weinberger Signed-off-by: Jiri Slaby commit 052db2fea6ed96b1bcb837316f9a62c3214c068d Author: Stefan Haberland Date: Tue Dec 15 10:45:05 2015 +0100 s390/dasd: fix refcount for PAV reassignment commit 9d862ababb609439c5d6987f6d3ddd09e703aa0b upstream. Add refcount to the DASD device when a summary unit check worker is scheduled. This prevents that the device is set offline with worker in place. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky Signed-off-by: Jiri Slaby commit 4c3ada65b234aff99a0380ffd32842b7ee478888 Author: Stefan Haberland Date: Tue Dec 15 10:16:43 2015 +0100 s390/dasd: prevent incorrect length error under z/VM after PAV changes commit 020bf042e5b397479c1174081b935d0ff15d1a64 upstream. The channel checks the specified length and the provided amount of data for CCWs and provides an incorrect length error if the size does not match. Under z/VM with simulation activated the length may get changed. Having the suppress length indication bit set is stated as good CCW coding practice and avoids errors under z/VM. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky Signed-off-by: Jiri Slaby commit 6f751109450760d466d678ea4971e54b0bb63273 Author: Filipe Manana Date: Thu Dec 31 18:16:29 2015 +0000 Btrfs: fix number of transaction units required to create symlink commit 9269d12b2d57d9e3d13036bb750762d1110d425c upstream. We weren't accounting for the insertion of an inline extent item for the symlink inode nor that we need to update the parent inode item (through the call to btrfs_add_nondir()). So fix this by including two more transaction units. Signed-off-by: Filipe Manana Signed-off-by: Jiri Slaby commit 6aa9b83f7f4370a314753b30ba2010472963b66a Author: Filipe Manana Date: Thu Dec 31 18:07:59 2015 +0000 Btrfs: send, don't BUG_ON() when an empty symlink is found commit a879719b8c90e15c9e7fa7266d5e3c0ca962f9df upstream. When a symlink is successfully created it always has an inline extent containing the source path. However if an error happens when creating the symlink, we can leave in the subvolume's tree a symlink inode without any such inline extent item - this happens if after btrfs_symlink() calls btrfs_end_transaction() and before it calls the inode eviction handler (through the final iput() call), the transaction gets committed and a crash happens before the eviction handler gets called, or if a snapshot of the subvolume is made before the eviction handler gets called. Sadly we can't just avoid this by making btrfs_symlink() call btrfs_end_transaction() after it calls the eviction handler, because the later can commit the current transaction before it removes any items from the subvolume tree (if it encounters ENOSPC errors while reserving space for removing all the items). So make send fail more gracefully, with an -EIO error, and print a message to dmesg/syslog informing that there's an empty symlink inode, so that the user can delete the empty symlink or do something else about it. Reported-by: Stephen R. van den Berg Signed-off-by: Filipe Manana Signed-off-by: Jiri Slaby commit 84d075f30de97089689b0775e122b21b3d3821e9 Author: Josef Bacik Date: Thu Oct 22 15:05:09 2015 -0400 Btrfs: igrab inode in writepage commit be7bd730841e69fe8f70120098596f648cd1f3ff upstream. We hit this panic on a few of our boxes this week where we have an ordered_extent with an NULL inode. We do an igrab() of the inode in writepages, but weren't doing it in writepage which can be called directly from the VM on dirty pages. If the inode has been unlinked then we could have I_FREEING set which means igrab() would return NULL and we get this panic. Fix this by trying to igrab in btrfs_writepage, and if it returns NULL then just redirty the page and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks, Signed-off-by: Josef Bacik Reviewed-by: Liu Bo Signed-off-by: David Sterba Signed-off-by: Jiri Slaby commit 9ec709846fe9fe45a5d128a7e00f2aaa4e597a7f Author: Anand Jain Date: Wed Oct 7 17:23:23 2015 +0800 Btrfs: add missing brelse when superblock checksum fails commit b2acdddfad13c38a1e8b927d83c3cf321f63601a upstream. Looks like oversight, call brelse() when checksum fails. Further down the code, in the non error path, we do call brelse() and so we don't see brelse() in the goto error paths. Signed-off-by: Anand Jain Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Jiri Slaby commit 40c0155d68140a36d52cc7f94cce5fa1f289509f Author: Russell King Date: Fri Dec 11 12:09:03 2015 +0000 scripts: recordmcount: break hardlinks commit dd39a26538e37f6c6131e829a4a510787e43c783 upstream. recordmcount edits the file in-place, which can cause problems when using ccache in hardlink mode. Arrange for recordmcount to break a hardlinked object. Link: http://lkml.kernel.org/r/E1a7MVT-0000et-62@rmk-PC.arm.linux.org.uk Signed-off-by: Russell King Signed-off-by: Steven Rostedt Signed-off-by: Jiri Slaby commit 107626c1d8e73311be1815837b16a2aa0195fdfe Author: James Bottomley Date: Fri Dec 11 09:16:38 2015 -0800 ses: fix additional element traversal bug commit 5e1033561da1152c57b97ee84371dba2b3d64c25 upstream. KASAN found that our additional element processing scripts drop off the end of the VPD page into unallocated space. The reason is that not every element has additional information but our traversal routines think they do, leading to them expecting far more additional information than is present. Fix this by adding a gate to the traversal routine so that it only processes elements that are expected to have additional information (list is in SES-2 section 6.1.13.1: Additional Element Status diagnostic page overview) Reported-by: Pavel Tikhomirov Tested-by: Pavel Tikhomirov Signed-off-by: James Bottomley Signed-off-by: Jiri Slaby commit 1d4d5a272c06bf2d9cf4cb797b68c8080ee7f972 Author: James Bottomley Date: Tue Dec 8 09:00:31 2015 -0800 ses: Fix problems with simple enclosures commit 3417c1b5cb1fdc10261dbed42b05cc93166a78fd upstream. Simple enclosure implementations (mostly USB) are allowed to return only page 8 to every diagnostic query. That really confuses our implementation because we assume the return is the page we asked for and end up doing incorrect offsets based on bogus information leading to accesses outside of allocated ranges. Fix that by checking the page code of the return and giving an error if it isn't the one we asked for. This should fix reported bugs with USB storage by simply refusing to attach to enclosures that behave like this. It's also good defensive practise now that we're starting to see more USB enclosures. Reported-by: Andrea Gelmini Reviewed-by: Ewan D. Milne Reviewed-by: Tomas Henzl Signed-off-by: James Bottomley Signed-off-by: Jiri Slaby commit 3fdf3c8935794c9a2c9cd6d98bcf1f79eea348d4 Author: Johannes Berg Date: Thu Dec 10 10:37:51 2015 +0100 rfkill: copy the name into the rfkill struct commit b7bb110008607a915298bf0f47d25886ecb94477 upstream. Some users of rfkill, like NFC and cfg80211, use a dynamic name when allocating rfkill, in those cases dev_name(). Therefore, the pointer passed to rfkill_alloc() might not be valid forever, I specifically found the case that the rfkill name was quite obviously an invalid pointer (or at least garbage) when the wiphy had been renamed. Fix this by making a copy of the rfkill name in rfkill_alloc(). Signed-off-by: Johannes Berg Signed-off-by: Jiri Slaby commit 2b7dac5f1c240e7432948f5e64440ec8e9dec90e Author: Kirill A. Shutemov Date: Mon Nov 30 04:17:31 2015 +0200 vgaarb: fix signal handling in vga_get() commit 9f5bd30818c42c6c36a51f93b4df75a2ea2bd85e upstream. There are few defects in vga_get() related to signal hadning: - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE case; - if we found pending signal we must remove ourself from wait queue and change task state back to running; - -ERESTARTSYS is more appropriate, I guess. Signed-off-by: Kirill A. Shutemov Reviewed-by: David Herrmann Signed-off-by: Dave Airlie Signed-off-by: Jiri Slaby commit c96f4852b59b919f747a5fba9320a12f23971e8c Author: Joe Thornber Date: Thu Dec 10 14:37:53 2015 +0000 dm btree: fix bufio buffer leaks in dm_btree_del() error path commit ed8b45a3679eb49069b094c0711b30833f27c734 upstream. If dm_btree_del()'s call to push_frame() fails, e.g. due to btree_node_validator finding invalid metadata, the dm_btree_del() error path must unlock all frames (which have active dm-bufio buffers) that were pushed onto the del_stack. Otherwise, dm_bufio_client_destroy() will BUG_ON() because dm-bufio buffers have leaked, e.g.: device-mapper: bufio: leaked buffer 3, hold count 1, list 0 Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Jiri Slaby commit 70728885b1a6c1dce9f2b848de84fdacd3a6c0e9 Author: Joe Thornber Date: Wed Dec 9 16:38:12 2015 +0000 dm space map metadata: fix ref counting bug when bootstrapping a new space map commit 50dd842ad83b43bed71790efb31cfb2f6c05c9c1 upstream. When applying block operations (BOPs) do not remove them from the uncommitted BOP ring-buffer until after they've been applied -- in case we recurse. Also, perform BOP_INC operation, in dm_sm_metadata_create() and sm_metadata_extend(), in terms of the uncommitted BOP ring-buffer rather than using direct calls to sm_ll_inc(). Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Jiri Slaby commit b25005563a798dacdb700cc5231f8420ac0cafdd Author: Mikulas Patocka Date: Thu Nov 26 12:00:59 2015 -0500 sata_sil: disable trim commit d98f1cd0a3b70ea91f1dfda3ac36c3b2e1a4d5e2 upstream. When I connect an Intel SSD to SATA SIL controller (PCI ID 1095:3114), any TRIM command results in I/O errors being reported in the log. There is other similar error reported with TRIM and the SIL controller: https://bugs.centos.org/view.php?id=5880 Apparently the controller doesn't support TRIM commands. This patch disables TRIM support on the SATA SIL controller. ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata7.00: BMDMA2 stat 0x50001 ata7.00: failed command: DATA SET MANAGEMENT ata7.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) ata7.00: status: { DRDY ERR } ata7.00: error: { ABRT } ata7.00: device reported invalid CHS sector 0 sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [descriptor] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command sd 8:0:0:0: [sdb] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 21 95 88 00 20 00 00 00 00 blk_update_request: I/O error, dev sdb, sector 2200968 Signed-off-by: Mikulas Patocka Signed-off-by: Tejun Heo Signed-off-by: Jiri Slaby commit f01def7badd549af9c00ee3d9be3c63cb69cfcc0 Author: Sasha Levin Date: Mon Nov 30 20:34:20 2015 -0500 sched/core: Remove false-positive warning from wake_up_process() commit 119d6f6a3be8b424b200dcee56e74484d5445f7e upstream. Because wakeups can (fundamentally) be late, a task might not be in the expected state. Therefore testing against a task's state is racy, and can yield false positives. Signed-off-by: Sasha Levin Signed-off-by: Peter Zijlstra (Intel) Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: oleg@redhat.com Fixes: 9067ac85d533 ("wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task") Link: http://lkml.kernel.org/r/1448933660-23082-1-git-send-email-sasha.levin@oracle.com Signed-off-by: Ingo Molnar Signed-off-by: Jiri Slaby commit d42cb3972c5227f7434844521135948dd7b6ddf9 Author: Xunlei Pang Date: Wed Dec 2 19:52:59 2015 +0800 sched/core: Clear the root_domain cpumasks in init_rootdomain() commit 8295c69925ad53ec32ca54ac9fc194ff21bc40e2 upstream. root_domain::rto_mask allocated through alloc_cpumask_var() contains garbage data, this may cause problems. For instance, When doing pull_rt_task(), it may do useless iterations if rto_mask retains some extra garbage bits. Worse still, this violates the isolated domain rule for clustered scheduling using cpuset, because the tasks(with all the cpus allowed) belongs to one root domain can be pulled away into another root domain. The patch cleans the garbage by using zalloc_cpumask_var() instead of alloc_cpumask_var() for root_domain::rto_mask allocation, thereby addressing the issues. Do the same thing for root_domain's other cpumask memembers: dlo_mask, span, and online. Signed-off-by: Xunlei Pang Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1449057179-29321-1-git-send-email-xlpang@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Jiri Slaby commit 9b2239e264e282b4cc802f8abe529c61d48fad1d Author: Johannes Berg Date: Tue Nov 17 14:25:21 2015 +0100 mac80211: mesh: fix call_rcu() usage commit c2e703a55245bfff3db53b1f7cbe59f1ee8a4339 upstream. When using call_rcu(), the called function may be delayed quite significantly, and without a matching rcu_barrier() there's no way to be sure it has finished. Therefore, global state that could be gone/freed/reused should never be touched in the callback. Fix this in mesh by moving the atomic_dec() into the caller; that's not really a problem since we already unlinked the path and it will be destroyed anyway. This fixes a crash Jouni observed when running certain tests in a certain order, in which the mesh interface was torn down, the memory reused for a function pointer (work struct) and running that then crashed since the pointer had been decremented by 1, resulting in an invalid instruction byte stream. Fixes: eb2b9311fd00 ("mac80211: mesh path table implementation") Reported-by: Jouni Malinen Signed-off-by: Johannes Berg Signed-off-by: Jiri Slaby commit 8c4cb2a75a22b5720342899496123c4c78939640 Author: Suman Anna Date: Wed Sep 16 19:29:17 2015 -0500 virtio: fix memory leak of virtio ida cache layers commit c13f99b7e945dad5273a8b7ee230f4d1f22d3354 upstream. The virtio core uses a static ida named virtio_index_ida for assigning index numbers to virtio devices during registration. The ida core may allocate some internal idr cache layers and an ida bitmap upon any ida allocation, and all these layers are truely freed only upon the ida destruction. The virtio_index_ida is not destroyed at present, leading to a memory leak when using the virtio core as a module and atleast one virtio device is registered and unregistered. Fix this by invoking ida_destroy() in the virtio core module exit. Signed-off-by: Suman Anna Signed-off-by: Michael S. Tsirkin Signed-off-by: Jiri Slaby commit 0913ffd1940f89cadd3f10279e56f47b4d42b283 Author: Steven Rostedt (Red Hat) Date: Mon Nov 23 10:35:36 2015 -0500 ring-buffer: Update read stamp with first real commit on page commit b81f472a208d3e2b4392faa6d17037a89442f4ce upstream. Do not update the read stamp after swapping out the reader page from the write buffer. If the reader page is swapped out of the buffer before an event is written to it, then the read_stamp may get an out of date timestamp, as the page timestamp is updated on the first commit to that page. rb_get_reader_page() only returns a page if it has an event on it, otherwise it will return NULL. At that point, check if the page being returned has events and has not been read yet. Then at that point update the read_stamp to match the time stamp of the reader page. Signed-off-by: Steven Rostedt Signed-off-by: Jiri Slaby commit b0bd8e379bc2df1f200a70f97f26d9d1952bd1ba Author: Jan Engelhardt Date: Mon Nov 23 17:46:32 2015 +0100 target: fix COMPARE_AND_WRITE non zero SGL offset data corruption commit d94e5a61357a04938ce14d6033b4d33a3c5fd780 upstream. target_core_sbc's compare_and_write functionality suffers from taking data at the wrong memory location when writing a CAW request to disk when a SGL offset is non-zero. This can happen with loopback and vhost-scsi fabric drivers when SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers. Given the following sample LIO subtopology, % targetcli ls /loopback/ o- loopback ................................. [1 Target] o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3] o- luns ................................... [2 LUNs] o- lun0 ................ [iblock/ram0 (/dev/ram0)] o- lun1 ................ [iblock/ram1 (/dev/ram1)] % lsscsi -g [3:0:1:0] disk LIO-ORG IBLOCK 4.0 /dev/sdc /dev/sg3 [3:0:1:1] disk LIO-ORG IBLOCK 4.0 /dev/sdd /dev/sg4 the following bug can be observed in Linux 4.3 and 4.4~rc1: % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand % perl -e 'print "\0" x 512' >zero % cat rand >/dev/sdd % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd Miscompare reported % hexdump -Cn 512 /dev/sdd 00000000 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00000200 Rather than writing all-zeroes as instructed with the -D file, it corrupts the data in the sector by splicing some of the original bytes in. The page of the first entry of cmd->t_data_sg includes the CDB, and sg->offset is set to a position past the CDB. I presume that sg->offset is also the right choice to use for subsequent sglist members. Signed-off-by: Jan Engelhardt Tested-by: Douglas Gilbert Signed-off-by: Nicholas Bellinger Signed-off-by: Jiri Slaby commit efc98f01dc98e7a4169df578f109d36608c60b28 Author: Nicholas Bellinger Date: Thu Nov 5 23:37:59 2015 -0800 target: Fix race for SCF_COMPARE_AND_WRITE_POST checking commit 057085e522f8bf94c2e691a5b76880f68060f8ba upstream. This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg Signed-off-by: Nicholas Bellinger Signed-off-by: Jiri Slaby commit dd0b1896da977ee503f1279175d71a73e45e3b1c Author: Jan Kara Date: Mon Nov 23 13:09:51 2015 +0100 vfs: Avoid softlockups with sendfile(2) commit c2489e07c0a71a56fb2c84bc0ee66cddfca7d068 upstream. The following test program from Dmitry can cause softlockups or RCU stalls as it copies 1GB from tmpfs into eventfd and we don't have any scheduling point at that path in sendfile(2) implementation: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); Add cond_resched() into __splice_from_pipe() to fix the problem. CC: Dmitry Vyukov Signed-off-by: Jan Kara Signed-off-by: Al Viro Signed-off-by: Jiri Slaby commit 69aad7e01c8e883e9d2f8dc5523bd419bd02d2aa Author: Kees Cook Date: Thu Nov 19 17:18:54 2015 -0800 mac: validate mac_partition is within sector commit 02e2a5bfebe99edcf9d694575a75032d53fe1b73 upstream. If md->signature == MAC_DRIVER_MAGIC and md->block_size == 1023, a single 512 byte sector would be read (secsize / 512). However the partition structure would be located past the end of the buffer (secsize % 512). Signed-off-by: Kees Cook Signed-off-by: Jens Axboe Signed-off-by: Jiri Slaby commit 7c721f4cc915db3556339e39c906d6877d02a90f Author: Luca Porzio Date: Fri Nov 6 15:12:26 2015 +0000 mmc: remove bondage between REQ_META and reliable write commit d3df0465db00cf4ed9f90d0bfc3b827d32b9c796 upstream. Anytime a write operation is performed with Reliable Write flag enabled, the eMMC device is enforced to bypass the cache and do a write to the underling NVM device by Jedec specification; this causes a performance penalty since write operations can't be optimized by the device cache. In our tests, we replayed a typical mobile daily trace pattern and found ~9% overall time reduction in trace replay by using this patch. Also the write ops within 4KB~64KB chunk size range get a 40~60% performance improvement by using the patch (as this range of write chunks are the ones affected by REQ_META). This patch has been discussed in the Mobile & Embedded Linux Storage Forum and it's the results of feedbacks from many people. We also checked with fsdevl and f2fs mailing list developers that this change in the usage of REQ_META is not affecting FS behavior and we got positive feedbacks. Reporting here the feedbacks: http://comments.gmane.org/gmane.linux.file-systems/97219 http://thread.gmane.org/gmane.linux.file-systems.f2fs/3178/focus=3183 Signed-off-by: Bruce Ford Signed-off-by: Luca Porzio Fixes: ce39f9d17c14 ("mmc: support packed write command for eMMC4.5 devices") Signed-off-by: Ulf Hansson Signed-off-by: Jiri Slaby commit e0aeab837c65d28dd0923ea97ad0ed876bc1e71c Author: K. Y. Srinivasan Date: Mon Aug 31 08:21:54 2015 -0700 storvsc: Don't set the SRB_FLAGS_QUEUE_ACTION_ENABLE flag commit 8cf308e1225f5f93575f03cc4dbef24516fa81c9 upstream. Don't set the SRB_FLAGS_QUEUE_ACTION_ENABLE flag since we are not specifying tags. Without this, the qlogic driver doesn't work properly with storvsc. Signed-off-by: K. Y. Srinivasan Signed-off-by: James Bottomley Signed-off-by: Jiri Slaby commit 8f5e11b31e179c491ac58e2826599deec35cf8f9 Author: sumit.saxena@avagotech.com Date: Thu Oct 15 13:40:54 2015 +0530 megaraid_sas : SMAP restriction--do not access user memory from IOCTL code commit 323c4a02c631d00851d8edc4213c4d184ef83647 upstream. This is an issue on SMAP enabled CPUs and 32 bit apps running on 64 bit OS. Do not access user memory from kernel code. The SMAP bit restricts accessing user memory from kernel code. Signed-off-by: Sumit Saxena Signed-off-by: Kashyap Desai Reviewed-by: Tomas Henzl Signed-off-by: Martin K. Petersen Signed-off-by: Jiri Slaby commit d55c6e414cfb5560487345f43b5ce0175e37a327 Author: sumit.saxena@avagotech.com Date: Thu Oct 15 13:40:04 2015 +0530 megaraid_sas: Do not use PAGE_SIZE for max_sectors commit 357ae967ad66e357f78b5cfb5ab6ca07fb4a7758 upstream. Do not use PAGE_SIZE marco to calculate max_sectors per I/O request. Driver code assumes PAGE_SIZE will be always 4096 which can lead to wrongly calculated value if PAGE_SIZE is not 4096. This issue was reported in Ubuntu Bugzilla Bug #1475166. Signed-off-by: Sumit Saxena Signed-off-by: Kashyap Desai Reviewed-by: Tomas Henzl Reviewed-by: Martin K. Petersen Signed-off-by: Martin K. Petersen Signed-off-by: Jiri Slaby commit 4692154f1564b47b931365aa267098c696597ec2 Author: Andy Shevchenko Date: Mon Sep 28 18:57:04 2015 +0300 dmaengine: dw: convert to __ffs() commit 39416677b95bf1ab8bbfa229ec7e511c96ad5d0c upstream. We replace __fls() by __ffs() since we have to find a *minimum* data width that satisfies both source and destination. While here, rename dwc_fast_fls() to dwc_fast_ffs() which it really is. Fixes: 4c2d56c574db (dw_dmac: introduce dwc_fast_fls()) Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul Signed-off-by: Jiri Slaby commit d91f018713155fb7fb9abbdb7d996dcb901ec607 Author: Valentin Rothberg Date: Tue Sep 22 19:00:40 2015 +0200 wm831x_power: Use IRQF_ONESHOT to request threaded IRQs commit 90adf98d9530054b8e665ba5a928de4307231d84 upstream. Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. scripts/coccinelle/misc/irqf_oneshot.cocci detected this issue. Fixes: b5874f33bbaf ("wm831x_power: Use genirq") Signed-off-by: Valentin Rothberg Signed-off-by: Sebastian Reichel Signed-off-by: Jiri Slaby commit 0b607563f72ff448d2915eb0a14e74a8fa549df0 Author: Dan Carpenter Date: Mon Sep 21 19:21:51 2015 +0300 devres: fix a for loop bounds check commit 1f35d04a02a652f14566f875aef3a6f2af4cb77b upstream. The iomap[] array has PCIM_IOMAP_MAX (6) elements and not DEVICE_COUNT_RESOURCE (16). This bug was found using a static checker. It may be that the "if (!(mask & (1 << i)))" check means we never actually go past the end of the array in real life. Fixes: ec04b075843d ('iomap: implement pcim_iounmap_regions()') Signed-off-by: Dan Carpenter Acked-by: Tejun Heo Signed-off-by: Jiri Slaby Signed-off-by: Jiri Slaby commit 005fe763adf0fafaaee89748070d96578d751198 Author: Andrey Ryabinin Date: Wed Sep 23 15:49:29 2015 +0300 lockd: create NSM handles per net namespace commit 0ad95472bf169a3501991f8f33f5147f792a8116 upstream. Commit cb7323fffa85 ("lockd: create and use per-net NSM RPC clients on MON/UNMON requests") introduced per-net NSM RPC clients. Unfortunately this doesn't make any sense without per-net nsm_handle. E.g. the following scenario could happen Two hosts (X and Y) in different namespaces (A and B) share the same nsm struct. 1. nsm_monitor(host_X) called => NSM rpc client created, nsm->sm_monitored bit set. 2. nsm_mointor(host-Y) called => nsm->sm_monitored already set, we just exit. Thus in namespace B ln->nsm_clnt == NULL. 3. host X destroyed => nsm->sm_count decremented to 1 4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr dereference of *ln->nsm_clnt So this could be fixed by making per-net nsm_handles list, instead of global. Thus different net namespaces will not be able share the same nsm_handle. Signed-off-by: Andrey Ryabinin Signed-off-by: J. Bruce Fields Signed-off-by: Jiri Slaby commit dffd45183e02ec8ad819c963af031fb64d7d4ead Author: Alex Deucher Date: Mon Nov 23 16:43:29 2015 -0500 drm/radeon: make rv770_set_sw_state failures non-fatal commit 4e7697ed79d0c0d5f869c87a6b3ce3d5cd1a07d6 upstream. On some cards it takes a relatively long time for the change to take place. Make a timeout non-fatal. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76130 Signed-off-by: Alex Deucher Signed-off-by: Jiri Slaby commit 0ea3c0a5ae0b286ccb86212350258caae8a7f0eb Author: Roman Volkov Date: Fri Jan 1 16:24:41 2016 +0300 clocksource/drivers/vt8500: Increase the minimum delta commit f9eccf24615672896dc13251410c3f2f33a14f95 upstream. The vt8500 clocksource driver declares itself as capable to handle the minimum delay of 4 cycles by passing the value into clockevents_config_and_register(). The vt8500_timer_set_next_event() requires the passed cycles value to be at least 16. The impact is that userspace hangs in nanosleep() calls with small delay intervals. This problem is reproducible in Linux 4.2 starting from: c6eb3f70d448 ('hrtimer: Get rid of hrtimer softirq') From Russell King, more detailed explanation: "It's a speciality of the StrongARM/PXA hardware. It takes a certain number of OSCR cycles for the value written to hit the compare registers. So, if a very small delta is written (eg, the compare register is written with a value of OSCR + 1), the OSCR will have incremented past this value before it hits the underlying hardware. The result is, that you end up waiting a very long time for the OSCR to wrap before the event fires. So, we introduce a check in set_next_event() to detect this and return -ETIME if the calculated delta is too small, which causes the generic clockevents code to retry after adding the min_delta specified in clockevents_config_and_register() to the current time value. min_delta must be sufficient that we don't re-trip the -ETIME check - if we do, we will return -ETIME, forward the next event time, try to set it, return -ETIME again, and basically lock the system up. So, min_delta must be larger than the check inside set_next_event(). A factor of two was chosen to ensure that this situation would never occur. The PXA code worked on PXA systems for years, and I'd suggest no one changes this mechanism without access to a wide range of PXA systems, otherwise they're risking breakage." Cc: Russell King Acked-by: Alexey Charkov Signed-off-by: Roman Volkov Signed-off-by: Daniel Lezcano Signed-off-by: Jiri Slaby commit 77e16d341c043b6da844895b4d4e0834061fdf50 Author: Roman Volkov Date: Fri Jan 1 16:38:11 2016 +0300 dts: vt8500: Add SDHC node to DTS file for WM8650 commit 0f090bf14e51e7eefb71d9d1c545807f8b627986 upstream. Since WM8650 has the same 'WMT' SDHC controller as WM8505, and the driver is already in the kernel, this node enables the controller support for WM8650 Signed-off-by: Roman Volkov Reviewed-by: Alexey Charkov Signed-off-by: Arnd Bergmann Signed-off-by: Jiri Slaby commit 5df68eedfb0e3cfa8c23c8b0b28bf032881313e4 Author: Thomas Gleixner Date: Sun Dec 13 18:12:30 2015 +0100 genirq: Prevent chip buslock deadlock commit abc7e40c81d113ef4bacb556f0a77ca63ac81d85 upstream. If a interrupt chip utilizes chip->buslock then free_irq() can deadlock in the following way: CPU0 CPU1 interrupt(X) (Shared or spurious) free_irq(X) interrupt_thread(X) chip_bus_lock(X) irq_finalize_oneshot(X) chip_bus_lock(X) synchronize_irq(X) synchronize_irq() waits for the interrupt thread to complete, i.e. forever. Solution is simple: Drop chip_bus_lock() before calling synchronize_irq() as we do with the irq_desc lock. There is nothing to be protected after the point where irq_desc lock has been released. This adds chip_bus_lock/unlock() to the remove_irq() code path, but that's actually correct in the case where remove_irq() is called on such an interrupt. The current users of remove_irq() are not affected as none of those interrupts is on a chip which requires buslock. Reported-by: Fredrik Markström Signed-off-by: Thomas Gleixner Signed-off-by: Jiri Slaby commit 281eea0a8603241edc3fe38c1ab4fa0a92ebec2b Author: Peter Zijlstra Date: Thu Jun 11 14:46:41 2015 +0200 sched, rt: Convert switched_{from, to}_rt() / prio_changed_rt() to balance callbacks commit fd7a4bed183523275279c9addbf42fce550c2e90 upstream. Remove the direct {push,pull} balancing operations from switched_{from,to}_rt() / prio_changed_rt() and use the balance callback queue. Again, err on the side of too many reschedules; since too few is a hard bug while too many is just annoying. Signed-off-by: Peter Zijlstra (Intel) Cc: ktkhai@parallels.com Cc: rostedt@goodmis.org Cc: juri.lelli@gmail.com Cc: pang.xunlei@linaro.org Cc: oleg@redhat.com Cc: wanpeng.li@linux.intel.com Cc: umgwanakikbuti@gmail.com Link: http://lkml.kernel.org/r/20150611124742.766832367@infradead.org Signed-off-by: Thomas Gleixner Signed-off-by: Byungchul Park Signed-off-by: Jiri Slaby commit 2f61a9e78fc7a18a55cba55a812337c50bb99f24 Author: Peter Zijlstra Date: Thu Jun 11 14:46:40 2015 +0200 sched,rt: Remove return value from pull_rt_task() commit 8046d6806247088de5725eaf8a2580b29e50ac5a upstream. In order to be able to use pull_rt_task() from a callback, we need to do away with the return value. Since the return value indicates if we should reschedule, do this inside the function. Since not all callers currently do this, this can increase the number of reschedules due rt balancing. Too many reschedules is not a correctness issues, too few are. Signed-off-by: Peter Zijlstra (Intel) Cc: ktkhai@parallels.com Cc: rostedt@goodmis.org Cc: juri.lelli@gmail.com Cc: pang.xunlei@linaro.org Cc: oleg@redhat.com Cc: wanpeng.li@linux.intel.com Cc: umgwanakikbuti@gmail.com Link: http://lkml.kernel.org/r/20150611124742.679002000@infradead.org Signed-off-by: Thomas Gleixner Signed-off-by: Byungchul Park Signed-off-by: Jiri Slaby commit f4b877aeaabbc0d7ed778ca170fd58272a4a10ee Author: Peter Zijlstra Date: Thu Jun 11 14:46:39 2015 +0200 sched: Allow balance callbacks for check_class_changed() commit 4c9a4bc89a9cca8128bce67d6bc8870d6b7ee0b2 upstream. In order to remove dropping rq->lock from the switched_{to,from}()/prio_changed() sched_class methods, run the balance callbacks after it. We need to remove dropping rq->lock because its buggy, suppose using sched_setattr()/sched_setscheduler() to change a running task from FIFO to OTHER. By the time we get to switched_from_rt() the task is already enqueued on the cfs runqueues. If switched_from_rt() does pull_rt_task() and drops rq->lock, load-balancing can come in and move our task @p to another rq. The subsequent switched_to_fair() still assumes @p is on @rq and bad things will happen. By using balance callbacks we delay the load-balancing operations {rt,dl}x{push,pull} until we've done all the important work and the task is fully set up. Furthermore, the balance callbacks do not know about @p, therefore they cannot get confused like this. Reported-by: Mike Galbraith Signed-off-by: Peter Zijlstra (Intel) Cc: ktkhai@parallels.com Cc: rostedt@goodmis.org Cc: juri.lelli@gmail.com Cc: pang.xunlei@linaro.org Cc: oleg@redhat.com Cc: wanpeng.li@linux.intel.com Link: http://lkml.kernel.org/r/20150611124742.615343911@infradead.org Signed-off-by: Thomas Gleixner Signed-off-by: Byungchul Park Signed-off-by: Jiri Slaby commit 69836a46b1c986665c514106b0137984cacb18dc Author: Peter Zijlstra Date: Thu Jun 11 14:46:37 2015 +0200 sched: Replace post_schedule with a balance callback list commit e3fca9e7cbfb72694a21c886fcdf9f059cfded9c upstream. Generalize the post_schedule() stuff into a balance callback list. This allows us to more easily use it outside of schedule() and cross sched_class. Signed-off-by: Peter Zijlstra (Intel) Cc: ktkhai@parallels.com Cc: rostedt@goodmis.org Cc: juri.lelli@gmail.com Cc: pang.xunlei@linaro.org Cc: oleg@redhat.com Cc: wanpeng.li@linux.intel.com Cc: umgwanakikbuti@gmail.com Link: http://lkml.kernel.org/r/20150611124742.424032725@infradead.org Signed-off-by: Thomas Gleixner Signed-off-by: Byungchul Park Signed-off-by: Jiri Slaby commit ee36ee687fa390924b88ce40bf1789a8abb340bd Author: Peter Zijlstra Date: Fri Jan 17 15:09:39 2014 +0100 sched: Clean up idle task SMP logic commit 6c3b4d44ba2838f00614a5a2d777d4401e0bfd71 upstream. The idle post_schedule flag is just a vile waste of time, furthermore it appears unneeded, move the idle_enter_fair() call into pick_next_task_idle(). Signed-off-by: Peter Zijlstra Cc: Daniel Lezcano Cc: Vincent Guittot Cc: alex.shi@linaro.org Cc: mingo@kernel.org Cc: Steven Rostedt Link: http://lkml.kernel.org/n/tip-aljykihtxJt3mkokxi0qZurb@git.kernel.org Signed-off-by: Ingo Molnar Cc: Byungchul Park Signed-off-by: Jiri Slaby commit ceb385a9e8e4b0a317c742dccb6abbff7512fd6d Author: Manish Chopra Date: Thu Jun 25 15:19:24 2015 +0300 bnx2x: Don't notify about scratchpad parities commit ad6afbe9578d1fa26680faf78c846bd8c00d1d6e upstream. The scratchpad is a shared block between all functions of a given device. Due to HW limitations, we can't properly close its parity notifications to all functions on legal flows. E.g., it's possible that while taking a register dump from one function a parity error would be triggered on other functions. Today driver doesn't consider this parity as a 'real' parity unless its being accompanied by additional indications [which would happen in a real parity scenario]; But it does print notifications for such events in the system logs. This eliminates such prints - in case of real parities driver would have additional indications; But if this is the only signal user will not even see a parity being logged in the system. Signed-off-by: Manish Chopra Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller Signed-off-by: Patrick Schaaf Tested-by: Patrick Schaaf Signed-off-by: Jiri Slaby commit 4c7eb9bc24f5e3a7d6ba10a44c66bd739418307b Author: Olga Kornievskaia Date: Mon Sep 14 19:54:36 2015 -0400 Failing to send a CLOSE if file is opened WRONLY and server reboots on a 4.x mount commit a41cbe86df3afbc82311a1640e20858c0cd7e065 upstream. A test case is as the description says: open(foobar, O_WRONLY); sleep() --> reboot the server close(foobar) The bug is because in nfs4state.c in nfs4_reclaim_open_state() a few line before going to restart, there is clear_bit(NFS4CLNT_RECLAIM_NOGRACE, &state->flags). NFS4CLNT_RECLAIM_NOGRACE is a flag for the client states not open owner states. Value of NFS4CLNT_RECLAIM_NOGRACE is 4 which is the value of NFS_O_WRONLY_STATE in nfs4_state->flags. So clearing it wipes out state and when we go to close it, “call_close” doesn’t get set as state flag is not set and CLOSE doesn’t go on the wire. Signed-off-by: Olga Kornievskaia Signed-off-by: Trond Myklebust Signed-off-by: Jiri Slaby commit ce3b7a01b74f45afffce2556d92a41003b169339 Author: Christophe Leroy Date: Wed May 6 17:26:47 2015 +0200 splice: sendfile() at once fails for big files commit 0ff28d9f4674d781e492bcff6f32f0fe48cf0fed upstream. Using sendfile with below small program to get MD5 sums of some files, it appear that big files (over 64kbytes with 4k pages system) get a wrong MD5 sum while small files get the correct sum. This program uses sendfile() to send a file to an AF_ALG socket for hashing. /* md5sum2.c */ #include #include #include #include #include #include #include #include #include int main(int argc, char **argv) { int sk = socket(AF_ALG, SOCK_SEQPACKET, 0); struct stat st; struct sockaddr_alg sa = { .salg_family = AF_ALG, .salg_type = "hash", .salg_name = "md5", }; int n; bind(sk, (struct sockaddr*)&sa, sizeof(sa)); for (n = 1; n < argc; n++) { int size; int offset = 0; char buf[4096]; int fd; int sko; int i; fd = open(argv[n], O_RDONLY); sko = accept(sk, NULL, 0); fstat(fd, &st); size = st.st_size; sendfile(sko, fd, &offset, size); size = read(sko, buf, sizeof(buf)); for (i = 0; i < size; i++) printf("%2.2x", buf[i]); printf(" %s\n", argv[n]); close(fd); close(sko); } exit(0); } Test below is done using official linux patch files. First result is with a software based md5sum. Second result is with the program above. root@vgoip:~# ls -l patch-3.6.* -rw-r--r-- 1 root root 64011 Aug 24 12:01 patch-3.6.2.gz -rw-r--r-- 1 root root 94131 Aug 24 12:01 patch-3.6.3.gz root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz 5fd77b24e68bb24dcc72d6e57c64790e patch-3.6.3.gz After investivation, it appears that sendfile() sends the files by blocks of 64kbytes (16 times PAGE_SIZE). The problem is that at the end of each block, the SPLICE_F_MORE flag is missing, therefore the hashing operation is reset as if it was the end of the file. This patch adds SPLICE_F_MORE to the flags when more data is pending. With the patch applied, we get the correct sums: root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz Signed-off-by: Christophe Leroy Signed-off-by: Jens Axboe Cc: Ben Hutchings Signed-off-by: Jiri Slaby commit aec2e8966c788ccb1d7beed3401adfb470676877 Author: Hariprasad S Date: Fri Dec 11 13:59:17 2015 +0530 iw_cxgb3: Fix incorrectly returning error on success commit 67f1aee6f45059fd6b0f5b0ecb2c97ad0451f6b3 upstream. The cxgb3_*_send() functions return NET_XMIT_ values, which are positive integers values. So don't treat positive return values as an error. Signed-off-by: Steve Wise Signed-off-by: Hariprasad Shenai Signed-off-by: Doug Ledford [a pox on developers and maintainers who do not cc: stable for bug fixes like this - gregkh] Signed-off-by: Jiri Slaby commit 11d0b15c0958797c7d3ead74b22807752286039f Author: Bjørn Mork Date: Fri Feb 12 16:40:00 2016 +0100 USB: option: add "4G LTE usb-modem U901" commit d061c1caa31d4d9792cfe48a2c6b309a0e01ef46 upstream. Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: Johan Hovold Signed-off-by: Jiri Slaby commit 0f98dcc17a3588a2c18a5510b4226c40e01aaafc Author: Andrey Skvortsov Date: Fri Jan 29 00:07:30 2016 +0300 USB: option: add support for SIM7100E commit 3158a8d416f4e1b79dcc867d67cb50013140772c upstream. $ lsusb: Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option $ usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2 P: Vendor=1e0e ProdID=9001 Rev= 2.32 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) The last interface (6) is used for Android Composite ADB interface. Serial port layout: 0: QCDM/DIAG 1: NMEA 2: AT 3: AT/PPP 4: audio Signed-off-by: Andrey Skvortsov Signed-off-by: Johan Hovold Signed-off-by: Jiri Slaby commit 7ea7824d6f33ec0b2bf5fe230ab231282fdef6a2 Author: Ken Lin Date: Mon Feb 1 14:57:25 2016 -0500 USB: cp210x: add IDs for GE B650V3 and B850V3 boards commit 6627ae19385283b89356a199d7f03c75ba35fb29 upstream. Add USB ID for cp2104/5 devices on GE B650v3 and B850v3 boards. Signed-off-by: Ken Lin Signed-off-by: Akshay Bhat Signed-off-by: Johan Hovold Signed-off-by: Jiri Slaby commit 0255cfabc796feb07444dc0b04780a9b9f3d3d70 Author: Gerhard Uttenthaler Date: Tue Dec 22 17:29:16 2015 +0100 can: ems_usb: Fix possible tx overflow commit 90cfde46586d2286488d8ed636929e936c0c9ab2 upstream. This patch fixes the problem that more CAN messages could be sent to the interface as could be send on the CAN bus. This was more likely for slow baud rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under heavy TX load this produced another bulk transfer without checking the free_slots variable and hence caused the overflow in the interface. Signed-off-by: Gerhard Uttenthaler Signed-off-by: Marc Kleine-Budde Signed-off-by: Jiri Slaby commit ac1c97af50cea184619281620520e76bee15cfdf Author: Joe Thornber Date: Wed Dec 9 16:23:24 2015 +0000 dm thin metadata: fix bug when taking a metadata snapshot commit 49e99fc717f624aa75ca755d6e7bc029efd3f0e9 upstream. When you take a metadata snapshot the btree roots for the mapping and details tree need to have their reference counts incremented so they persist for the lifetime of the metadata snap. The roots being incremented were those currently written in the superblock, which could possibly be out of date if concurrent IO is triggering new mappings, breaking of sharing, etc. Fix this by performing a commit with the metadata lock held while taking a metadata snapshot. Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Signed-off-by: Jiri Slaby commit 22481d15ed990d6c00be6dc0097cfc93279bfec9 Author: Zheng Liu Date: Sun Nov 29 17:21:57 2015 -0800 bcache: unregister reboot notifier if bcache fails to unregister device commit 2ecf0cdb2b437402110ab57546e02abfa68a716b upstream. In bcache_init() function it forgot to unregister reboot notifier if bcache fails to unregister a block device. This commit fixes this. Signed-off-by: Zheng Liu Tested-by: Joshua Schmid Tested-by: Eric Wheeler Cc: Kent Overstreet Signed-off-by: Jens Axboe Signed-off-by: Jiri Slaby commit 172690beba9309e5a9369f4b383cef6884cbc07c Author: Al Viro Date: Sun Nov 29 17:20:59 2015 -0800 bcache: fix a leak in bch_cached_dev_run() commit 4d4d8573a8451acc9f01cbea24b7e55f04a252fe upstream. Signed-off-by: Al Viro Tested-by: Joshua Schmid Tested-by: Eric Wheeler Cc: Kent Overstreet Signed-off-by: Jens Axboe Signed-off-by: Jiri Slaby commit fd84aab963018f879e2300c4f1b0378874a1e84a Author: Egbert Eich Date: Wed Jun 11 14:59:55 2014 +0200 drm/ast: Initialized data needed to map fbdev memory commit 28fb4cb7fa6f63dc2fbdb5f2564dcbead8e3eee0 upstream. Due to a missing initialization there was no way to map fbdev memory. Thus for example using the Xserver with the fbdev driver failed. This fix adds initialization for fix.smem_start and fix.smem_len in the fb_info structure, which fixes this problem. Requested-by: Benjamin Herrenschmidt Signed-off-by: Egbert Eich [pulled from SuSE tree by me - airlied] Signed-off-by: Dave Airlie Signed-off-by: Jiri Slaby commit b22889fed9e127b5d8bf2293148f5638ad5a25a4 Author: Steven Rostedt (Red Hat) Date: Mon Feb 15 12:36:14 2016 -0500 tracepoints: Do not trace when cpu is offline commit f37755490fe9bf76f6ba1d8c6591745d3574a6a6 upstream. The tracepoint infrastructure uses RCU sched protection to enable and disable tracepoints safely. There are some instances where tracepoints are used in infrastructure code (like kfree()) that get called after a CPU is going offline, and perhaps when it is coming back online but hasn't been registered yet. This can probuce the following warning: [ INFO: suspicious RCU usage. ] 4.4.0-00006-g0fe53e8-dirty #34 Tainted: G S ------------------------------- include/trace/events/kmem.h:141 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/8/0. stack backtrace: CPU: 8 PID: 0 Comm: swapper/8 Tainted: G S 4.4.0-00006-g0fe53e8-dirty #34 Call Trace: [c0000005b76c78d0] [c0000000008b9540] .dump_stack+0x98/0xd4 (unreliable) [c0000005b76c7950] [c00000000010c898] .lockdep_rcu_suspicious+0x108/0x170 [c0000005b76c79e0] [c00000000029adc0] .kfree+0x390/0x440 [c0000005b76c7a80] [c000000000055f74] .destroy_context+0x44/0x100 [c0000005b76c7b00] [c0000000000934a0] .__mmdrop+0x60/0x150 [c0000005b76c7b90] [c0000000000e3ff0] .idle_task_exit+0x130/0x140 [c0000005b76c7c20] [c000000000075804] .pseries_mach_cpu_die+0x64/0x310 [c0000005b76c7cd0] [c000000000043e7c] .cpu_die+0x3c/0x60 [c0000005b76c7d40] [c0000000000188d8] .arch_cpu_idle_dead+0x28/0x40 [c0000005b76c7db0] [c000000000101e6c] .cpu_startup_entry+0x50c/0x560 [c0000005b76c7ed0] [c000000000043bd8] .start_secondary+0x328/0x360 [c0000005b76c7f90] [c000000000008a6c] start_secondary_prolog+0x10/0x14 This warning is not a false positive either. RCU is not protecting code that is being executed while the CPU is offline. Instead of playing "whack-a-mole(TM)" and adding conditional statements to the tracepoints we find that are used in this instance, simply add a cpu_online() test to the tracepoint code where the tracepoint will be ignored if the CPU is offline. Use of raw_smp_processor_id() is fine, as there should never be a case where the tracepoint code goes from running on a CPU that is online and suddenly gets migrated to a CPU that is offline. Link: http://lkml.kernel.org/r/1455387773-4245-1-git-send-email-kda@linux-powerpc.org Reported-by: Denis Kirjanov Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints") Signed-off-by: Steven Rostedt Signed-off-by: Jiri Slaby commit 57008ec9cf578186ac15564d7f68d3870c600c7d Author: Neil Horman Date: Thu Feb 18 16:10:57 2016 -0500 sctp: Fix port hash table size computation [ Upstream commit d9749fb5942f51555dc9ce1ac0dbb1806960a975 ] Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in its size computation, observing that the current method never guaranteed that the hashsize (measured in number of entries) would be a power of two, which the input hash function for that table requires. The root cause of the problem is that two values need to be computed (one, the allocation order of the storage requries, as passed to __get_free_pages, and two the number of entries for the hash table). Both need to be ^2, but for different reasons, and the existing code is simply computing one order value, and using it as the basis for both, which is wrong (i.e. it assumes that ((1< Reported-by: Dmitry Vyukov CC: Dmitry Vyukov CC: Vladislav Yasevich CC: "David S. Miller" Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit ecee23698c61fb56704d1abb5f083e54a276be29 Author: Dmitry V. Levin Date: Fri Feb 19 04:27:48 2016 +0300 unix_diag: fix incorrect sign extension in unix_lookup_by_ino [ Upstream commit b5f0549231ffb025337be5a625b0ff9f52b016f0 ] The value passed by unix_diag_get_exact to unix_lookup_by_ino has type __u32, but unix_lookup_by_ino's argument ino has type int, which is not a problem yet. However, when ino is compared with sock_i_ino return value of type unsigned long, ino is sign extended to signed long, and this results to incorrect comparison on 64-bit architectures for inode numbers greater than INT_MAX. This bug was found by strace test suite. Fixes: 5d3cae8bc39d ("unix_diag: Dumping exact socket core") Signed-off-by: Dmitry V. Levin Acked-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 7b715d926d6bcd9ad1ccdf436e659aa86eebdeb5 Author: Anton Protopopov Date: Tue Feb 16 21:43:16 2016 -0500 rtnl: RTM_GETNETCONF: fix wrong return value [ Upstream commit a97eb33ff225f34a8124774b3373fd244f0e83ce ] An error response from a RTM_GETNETCONF request can return the positive error value EINVAL in the struct nlmsgerr that can mislead userspace. Signed-off-by: Anton Protopopov Acked-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 27b6d267f4d3652dee80ced90800904ed0df6a05 Author: Xin Long Date: Thu Feb 18 21:21:19 2016 +0800 route: check and remove route cache when we get route [ Upstream commit deed49df7390d5239024199e249190328f1651e7 ] Since the gc of ipv4 route was removed, the route cached would has no chance to be removed, and even it has been timeout, it still could be used, cause no code to check it's expires. Fix this issue by checking and removing route cache when we get route. Signed-off-by: Xin Long Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 00028cc77254f4973e6af17ea84fde3b1c2802dc Author: Guillaume Nault Date: Mon Feb 15 17:01:10 2016 +0100 pppoe: fix reference counting in PPPoE proxy [ Upstream commit 29e73269aa4d36f92b35610c25f8b01c789b0dc8 ] Drop reference on the relay_po socket when __pppoe_xmit() succeeds. This is already handled correctly in the error path. Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 63b7b33c7c4ae9dc71c2eef673611039aadbe87a Author: Eugenia Emantayev Date: Wed Feb 17 17:24:23 2016 +0200 net/mlx4_en: Choose time-stamping shift value according to HW frequency [ Upstream commit 31c128b66e5b28f468076e4f3ca3025c35342041 ] Previously, the shift value used for time-stamping was constant and didn't depend on the HW chip frequency. Change that to take the frequency into account and calculate the maximal value in cycles per wraparound of ten seconds. This time slot was chosen since it gives a good accuracy in time synchronization. Algorithm for shift value calculation: * Round up the maximal value in cycles to nearest power of two * Calculate maximal multiplier by division of all 64 bits set to above result * Then, invert the function clocksource_khz2mult() to get the shift from maximal mult value Fixes: ec693d47010e ('net/mlx4_en: Add HW timestamping (TS) support') Signed-off-by: Eugenia Emantayev Reviewed-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 866a0f55010d2d2c93c06cc3be423cd37ab12531 Author: Amir Vadai Date: Wed Feb 17 17:24:22 2016 +0200 net/mlx4_en: Count HW buffer overrun only once [ Upstream commit 281e8b2fdf8e4ef366b899453cae50e09b577ada ] RdropOvflw counts overrun of HW buffer, therefore should be used for rx_fifo_errors only. Currently RdropOvflw counter is mistakenly also set into rx_missed_errors and rx_over_errors too, which makes the device total dropped packets accounting to show wrong results. Fix that. Use it for rx_fifo_errors only. Fixes: c27a02cd94d6 ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by: Amir Vadai Signed-off-by: Eugenia Emantayev Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 82b090a896afa204ba1877f35e2897f23cafde22 Author: Bjørn Mork Date: Fri Feb 12 16:42:14 2016 +0100 qmi_wwan: add "4G LTE usb-modem U901" [ Upstream commit aac8d3c282e024c344c5b86dc1eab7af88bb9716 ] Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 6126da76d00e981cca46080c464f9c309067b022 Author: Rainer Weikusat Date: Thu Feb 11 19:37:27 2016 +0000 af_unix: Guard against other == sk in unix_dgram_sendmsg [ Upstream commit a5527dda344fff0514b7989ef7a755729769daa1 ] The unix_dgram_sendmsg routine use the following test if (unlikely(unix_peer(other) != sk && unix_recvq_full(other))) { to determine if sk and other are in an n:1 association (either established via connect or by using sendto to send messages to an unrelated socket identified by address). This isn't correct as the specified address could have been bound to the sending socket itself or because this socket could have been connected to itself by the time of the unix_peer_get but disconnected before the unix_state_lock(other). In both cases, the if-block would be entered despite other == sk which might either block the sender unintentionally or lead to trying to unlock the same spin lock twice for a non-blocking send. Add a other != sk check to guard against this. Fixes: 7d267278a9ec ("unix: avoid use-after-free in ep_remove_wait_queue") Reported-By: Philipp Hahn Signed-off-by: Rainer Weikusat Tested-by: Philipp Hahn Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit d1c560183199c55cfe50bd176dffdc16e5f55b6b Author: Eric Dumazet Date: Thu Feb 4 06:23:28 2016 -0800 ipv4: fix memory leaks in ip_cmsg_send() callers [ Upstream commit 919483096bfe75dda338e98d56da91a263746a0a ] Dmitry reported memory leaks of IP options allocated in ip_cmsg_send() when/if this function returns an error. Callers are responsible for the freeing. Many thanks to Dmitry for the report and diagnostic. Reported-by: Dmitry Vyukov Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 127e53abeede72da8d8d58b67b26f931737791ff Author: Jay Vosburgh Date: Tue Feb 2 13:35:56 2016 -0800 bonding: Fix ARP monitor validation [ Upstream commit 21a75f0915dde8674708b39abfcda113911c49b1 ] The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac717a ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico Cc: Andy Gospodarek Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit a5e5ae1321c6edc6a2ce7d32e28e66336d3b530a Author: Veaceslav Falico Date: Thu Feb 20 12:07:57 2014 +0100 bonding: fix bond_arp_rcv() race of curr_active_slave commit 010d3c3989706d800ae72253773fa6537cc9f74c upstream. bond->curr_active_slave can be changed between its deferences, even to NULL, and thus we might panic. We're always holding the rcu (rx_handler->bond_handle_frame()->bond_arp_rcv()) so fix this by rcu_dereferencing() it and using the saved. Reported-by: Ding Tianhong Fixes: aeea64a ("bonding: don't trust arp requests unless active slave really works") CC: Jay Vosburgh CC: Andy Gospodarek Signed-off-by: Veaceslav Falico Acked-by: Ding Tianhong Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit cccf7a00505a2fe33e23599bdedc4c3993e28a10 Author: Xin Long Date: Wed Feb 3 23:33:30 2016 +0800 sctp: translate network order to host order when users get a hmacid [ Upstream commit 7a84bd46647ff181eb2659fdc99590e6f16e501d ] Commit ed5a377d87dc ("sctp: translate host order to network order when setting a hmacid") corrected the hmacid byte-order when setting a hmacid. but the same issue also exists on getting a hmacid. We fix it by changing hmacids to host order when users get them with getsockopt. Fixes: Commit ed5a377d87dc ("sctp: translate host order to network order when setting a hmacid") Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit e03e0613e6333d3cd5c322f6486273b98e007882 Author: Siva Reddy Kallam Date: Wed Feb 3 14:09:38 2016 +0530 tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs [ Upstream commit b7d987295c74500b733a0ba07f9a9bcc4074fa83 ] tg3_tso_bug() can hit a condition where the entire tx ring is not big enough to segment the GSO packet. For example, if MSS is very small, gso_segs can exceed the tx ring size. When we hit the condition, it will cause tx timeout. tg3_tso_bug() is called to handle TSO and DMA hardware bugs. For TSO bugs, if tg3_tso_bug() cannot succeed, we have to drop the packet. For DMA bugs, we can still fall back to linearize the SKB and let the hardware transmit the TSO packet. This patch adds a function tg3_tso_bug_gso_check() to check if there are enough tx descriptors for GSO before calling tg3_tso_bug(). The caller will then handle the error appropriately - drop or lineraize the SKB. v2: Corrected patch description to avoid confusion. Signed-off-by: Siva Reddy Kallam Signed-off-by: Michael Chan Acked-by: Prashant Sreedharan Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 1ad3dfa534e42404edcca40e440b78976f8f99c3 Author: Hans Westgaard Ry Date: Wed Feb 3 09:26:57 2016 +0100 net:Add sysctl_max_skb_frags [ Upstream commit 5f74f82ea34c0da80ea0b49192bb5ea06e063593 ] Devices may have limits on the number of fragments in an skb they support. Current codebase uses a constant as maximum for number of fragments one skb can hold and use. When enabling scatter/gather and running traffic with many small messages the codebase uses the maximum number of fragments and may thereby violate the max for certain devices. The patch introduces a global variable as max number of fragments. Signed-off-by: Hans Westgaard Ry Reviewed-by: Håkon Bugge Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit a8837e30e3eece2c8c02345035c14b32f695bfcf Author: Eric Dumazet Date: Tue Feb 2 17:55:01 2016 -0800 ipv6: fix a lockdep splat [ Upstream commit 44c3d0c1c0a880354e9de5d94175742e2c7c9683 ] Silence lockdep false positive about rcu_dereference() being used in the wrong context. First one should use rcu_dereference_protected() as we own the spinlock. Second one should be a normal assignation, as no barrier is needed. Fixes: 18367681a10bd ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Reported-by: Dave Jones Signed-off-by: Eric Dumazet Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit e16f537864eb9cf68683d9e107706d1b31fcaa76 Author: Hangbin Liu Date: Thu Jul 30 14:28:42 2015 +0800 net/ipv6: add sysctl option accept_ra_min_hop_limit [ Upstream commit 8013d1d7eafb0589ca766db6b74026f76b7f5cb4 ] Commit 6fd99094de2b ("ipv6: Don't reduce hop limit for an interface") disabled accept hop limit from RA if it is smaller than the current hop limit for security stuff. But this behavior kind of break the RFC definition. RFC 4861, 6.3.4. Processing Received Router Advertisements A Router Advertisement field (e.g., Cur Hop Limit, Reachable Time, and Retrans Timer) may contain a value denoting that it is unspecified. In such cases, the parameter should be ignored and the host should continue using whatever value it is already using. If the received Cur Hop Limit value is non-zero, the host SHOULD set its CurHopLimit variable to the received value. So add sysctl option accept_ra_min_hop_limit to let user choose the minimum hop limit value they can accept from RA. And set default to 1 to meet RFC standards. Signed-off-by: Hangbin Liu Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 22d310aa03b6009f252c1c53fe2adb5b0919f330 Author: Paolo Abeni Date: Fri Jan 29 12:30:20 2016 +0100 ipv6/udp: use sticky pktinfo egress ifindex on connect() [ Upstream commit 1cdda91871470f15e79375991bd2eddc6e86ddb1 ] Currently, the egress interface index specified via IPV6_PKTINFO is ignored by __ip6_datagram_connect(), so that RFC 3542 section 6.7 can be subverted when the user space application calls connect() before sendmsg(). Fix it by initializing properly flowi6_oif in connect() before performing the route lookup. Signed-off-by: Paolo Abeni Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 63593b05a47bd00a5dd843f836762829791bbc92 Author: Marcelo Ricardo Leitner Date: Fri Jan 22 18:29:49 2016 -0200 sctp: allow setting SCTP_SACK_IMMEDIATELY by the application [ Upstream commit 27f7ed2b11d42ab6d796e96533c2076ec220affc ] This patch extends commit b93d6471748d ("sctp: implement the sender side for SACK-IMMEDIATELY extension") as it didn't white list SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be understood as an invalid flag and returning -EINVAL to the application. Note that the actual handling of the flag is already there in sctp_datamsg_from_user(). https://tools.ietf.org/html/rfc7053#section-7 Fixes: b93d6471748d ("sctp: implement the sender side for SACK-IMMEDIATELY extension") Signed-off-by: Marcelo Ricardo Leitner Acked-by: Vlad Yasevich Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 977abf5d26c2697f09c72efc579a759dcc6a4808 Author: Hannes Frederic Sowa Date: Fri Jan 22 01:39:43 2016 +0100 pptp: fix illegal memory access caused by multiple bind()s [ Upstream commit 9a368aff9cb370298fa02feeffa861f2db497c18 ] Several times already this has been reported as kasan reports caused by syzkaller and trinity and people always looked at RCU races, but it is much more simple. :) In case we bind a pptp socket multiple times, we simply add it to the callid_sock list but don't remove the old binding. Thus the old socket stays in the bucket with unused call_id indexes and doesn't get cleaned up. This causes various forms of kasan reports which were hard to pinpoint. Simply don't allow multiple binds and correct error handling in pptp_bind. Also keep sk_state bits in place in pptp_connect. Fixes: 00959ade36acad ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Cc: Dmitry Kozlov Cc: Sasha Levin Cc: Dmitry Vyukov Reported-by: Dmitry Vyukov Cc: Dave Jones Reported-by: Dave Jones Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 45c4c852c8ab5fb7e879892afa665dc47e55956d Author: Eric Dumazet Date: Sun Jan 24 13:53:50 2016 -0800 af_unix: fix struct pid memory leak [ Upstream commit fa0dc04df259ba2df3ce1920e9690c7842f8fa4b ] Dmitry reported a struct pid leak detected by a syzkaller program. Bug happens in unix_stream_recvmsg() when we break the loop when a signal is pending, without properly releasing scm. Fixes: b3ca9b02b007 ("net: fix multithreaded signal handling in unix recv routines") Reported-by: Dmitry Vyukov Signed-off-by: Eric Dumazet Cc: Rainer Weikusat Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit dd5626c81b249bbef45c4c4af2753a8f2ab1f1f6 Author: Eric Dumazet Date: Thu Jan 21 08:02:54 2016 -0800 tcp: fix NULL deref in tcp_v4_send_ack() [ Upstream commit e62a123b8ef7c5dc4db2c16383d506860ad21b47 ] Neal reported crashes with this stack trace : RIP: 0010:[] tcp_v4_send_ack+0x41/0x20f ... CR2: 0000000000000018 CR3: 000000044005c000 CR4: 00000000001427e0 ... [] tcp_v4_reqsk_send_ack+0xa5/0xb4 [] tcp_check_req+0x2ea/0x3e0 [] tcp_rcv_state_process+0x850/0x2500 [] tcp_v4_do_rcv+0x141/0x330 [] sk_backlog_rcv+0x21/0x30 [] tcp_recvmsg+0x75d/0xf90 [] inet_recvmsg+0x80/0xa0 [] sock_aio_read+0xee/0x110 [] do_sync_read+0x6f/0xa0 [] SyS_read+0x1e1/0x290 [] system_call_fastpath+0x16/0x1b The problem here is the skb we provide to tcp_v4_send_ack() had to be parked in the backlog of a new TCP fastopen child because this child was owned by the user at the time an out of window packet arrived. Before queuing a packet, TCP has to set skb->dev to NULL as the device could disappear before packet is removed from the queue. Fix this issue by using the net pointer provided by the socket (being a timewait or a request socket). IPv6 is immune to the bug : tcp_v6_send_response() already gets the net pointer from the socket if provided. Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Reported-by: Neal Cardwell Signed-off-by: Eric Dumazet Cc: Jerry Chu Cc: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 5e67dbf09bb4dc9c7745e1d94d67e9e857d1ff7c Author: Manfred Rudigier Date: Wed Jan 20 11:22:28 2016 +0100 net: dp83640: Fix tx timestamp overflow handling. [ Upstream commit 81e8f2e930fe76b9814c71b9d87c30760b5eb705 ] PHY status frames are not reliable, the PHY may not be able to send them during heavy receive traffic. This overflow condition is signaled by the PHY in the next status frame, but the driver did not make use of it. Instead it always reported wrong tx timestamps to user space after an overflow happened because it assigned newly received tx timestamps to old packets in the queue. This commit fixes this issue by clearing the tx timestamp queue every time an overflow happens, so that no timestamps are delivered for overflow packets. This way time stamping will continue correctly after an overflow. Signed-off-by: Manfred Rudigier Acked-by: Richard Cochran Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 28103f2f1fb676a2b305ed6e15f83a8a84906d45 Author: Ursula Braun Date: Tue Jan 19 10:41:33 2016 +0100 af_iucv: Validate socket address length in iucv_sock_bind() [ Upstream commit 52a82e23b9f2a9e1d429c5207f8575784290d008 ] Signed-off-by: Ursula Braun Reported-by: Dmitry Vyukov Reviewed-by: Evgeny Cherkashin Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby commit 6308e3add5288c1eb1b7ee2654d9a251cc487ab2 Author: Bin Liu Date: Mon Jan 26 16:22:06 2015 -0600 usb: musb: cppi41: correct the macro name EP_MODE_AUTOREG_* commit 0149b07a9e28b0d8bd2fc1c238ffe7d530c2673f upstream. The macro EP_MODE_AUTOREG_* should be called EP_MODE_AUTOREQ_*, as they are used for register AUTOREQ. Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi Signed-off-by: Jiri Slaby commit fa69c2b418d7aaae8d14810caecc9bfe3f44b4e5 Author: Corey Wright Date: Sun Feb 28 02:42:39 2016 -0600 proc: Fix ptrace-based permission checks for accessing task maps Modify mm_access() calls in fs/proc/task_mmu.c and fs/proc/task_nommu.c to have the mode include PTRACE_MODE_FSCREDS so accessing /proc/pid/maps and /proc/pid/pagemap is not denied to all users. In backporting upstream commit caaee623 to pre-3.18 kernel versions it was overlooked that mm_access() is used in fs/proc/task_*mmu.c as those calls were removed in 3.18 (by upstream commit 29a40ace) and did not exist at the time of the original commit. Fixes: caaee6234d ("ptrace: use fsuid, fsgid, effective creds for fs access checks") Signed-off-by: Corey Wright Acked-by: Jann Horn Signed-off-by: Jiri Slaby